I had forgotten how relaxing it can be. I turned a half dozen wine stoppers right after dinner. It is so much fun watching the tool and feeling the shavings come off. Other than 3 demo's I had not touched the lathe in 3 months. I will be doing a bowl demo Monday night so I'll get to play again.
I remember when turning something as simple as a wine stopper was really pretty difficult. The tools just wouldn't seem to do what I wanted them to do. Now they are almost an extension of my arms and it feels so cool. The shape just sort of appears as I move the tool. It's very magical.
I'll be turning a lot in another few weeks. I'm so close to getting all my ducks in a row from last years events. I plan to really dive back in.
John, it sounds like you have the execution part of turning wine stoppers down cold to the point that it is almost automatic. How about the design part? Is it automatic too? I find that I stand in front of the lathe longer trying to think of some sort of design innovation than actually turning the stopper. I am not into production turning and seem to have some sort of a compulsion not to repeat myself. Do you have a secret solution to pass along?
Dennis this was just playing and the shapes aren't very good. Decent and they will sell but I can do better. Many years ago I sat down and designed a bunch of wine stoppers. Many were based on an article in American Woodturner aabout 10 to 12 years ago. Now when I turn seriously for my gallery I get out the page of drawings and just go for it. There are slight modifications and I work for better overall forms but basically they are still the same.
Yep some nights I come home from a hard day at work and want to kick the cat and shot the dog Just going out and making shavings is a breath of fresh air
Even more satisfying if like John said the tools are part of you
I had a dream last night that I woke up with lathe tools as hands and was creating fantastic sculptures with my "extensions". I hope they were enterchangeable. I'd hate to be stuck with just 2 tools.
OK if you were stuck with just 2 tools what would they be. I think I could turn most anything with a bowl gouge and Bedan. I say bedan instead of skew because the shorter length on the cutting edge would make it easier to turn coves, use as a parting tool and would still do everything a skew will do. I'm not as good with the bedan as the skew but I can learn.
I�m glad it was just a dream. If it had been real, I don�t know if a bowl gouge and a bedan would be your best choice �. Think this through John �. Wouldn�t you prefer at least one hand to be a (rather dull) round-nose scraper? The bowl gouge may be good for soup, but the scraper may be more workable for putting jam on your toast or playing your guitar �..let�s not think about applications in the bathroom��