Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Wenge

Posts

Wenge

#1

Wenge

Kelly in Port Orchard

I was given a piece of Wenge; 8X8X4; bowl blank. I want to turn it into a bowl. What is the best way to seal the poures? The last time I used this wood, I noticed that is was very porous. I've never turned a bowl out of this species. Any suggestions? Thank you.

Kelly

Re: Wenge

#2

Re: Wenge

Terry Scott

Kelly soak it in sanding sealer I mean drown it Over night

Or alternatively Evidure a product used in the Boat building industry http://www.boatbits.co.nz/shop/Paints+Resins+Cleaners/Resins+-+Epoxy+Polyester/International+Resin,+Glue,+Fillers/Everdure+A+B.html

Beware the dust from Wenge is lethal as the particles are sharp edged and can lodge themselves in your lungs .

Re: Wenge

#3

Re: Wenge

john lucas

Kelly I used to turn a lot of it into hand mirrors and boxes. I never sealed the pores. It's not any worse pore wise than Oak or ash. It is splinter. Use sharp tools.

Re: Wenge

#4

Re: Wenge

steve worcester

Turns great, keeps a sharp edge, afterwards looks like you were turning Oreos.

Re: Wenge

#5

Re: Wenge

john lucas

Want to have some fun. Try bleaching it. The darkwood does not bleach. The lighter of the dark woods bleaches so it ends up looking like a Zebra. It's pretty cool.

Re: Wenge

#6

Re: Wenge

Bill Howatt

John,

Given the various bleaches discussed on this forum, which bleach do you recommend?

Thanks,

Bill

Re: Wenge

#7

Re: Wenge

John Lucas

Bill I use a product called Kleen strip. I don't know where to get it anymore. Last time I looked for some I found it at the local Porter Paint store. Lowes used to carry it but they don't anymore at least in my area.

Re: Wenge

#8

Brad Vietje

Wenge = "Harpoon Wood"

Brad Vietje

Kelly,

Just to supply a different position on the matter.... Wenge is a horrid turning wood. Its incredibly dusty, toxic as hell, and the splinters are barbed, like a $#%*& harpoon! Splinters are numerous and can be very painful. I really can't stand the stuff, but it looks pretty spectacular when finished nicely.

I'd say suit up, wear a mask, and run the respirator, and go for it! Might be possible to soak it in something to reduce the horrid dust, but Minwax Wood Hardener is even more toxic. You might also find a skin film of some sort to protect your skin from rash or splinters... I'd soak it in thinned PVA, like Elmer's Glue, and I'd consider a CNC lathe if I had access to one!

Have fun ... better you than me, friend!

Brad Vietje

Newbury, VT