Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Carbide Tip tools

Posts

Carbide Tip tools

#1

Carbide Tip tools

Nick Tuzzolino

Are there any other makers of these carbide tip tools other than EZ Rougher?

There must be some competition out there.

Re: Carbide Tip tools

#2

Re: Carbide Tip tools

Ralph Lindberg

Quite a number actually. FYI, the rougher tip is basically the replaceable blade from commercial planner heads.

Re: Carbide Tip tools

#3

Re: Carbide Tip tools *LINK*

Ed Davidson

Nick,

The December American Woodturner issue (Vol 25 � No 6, page 28-31) included a comprehensive article by John English titled �Carbide Insert Lathe Tools". Several different carbide tool manufacturers were mentioned in the article.


American Woodturner

Re: Carbide Tip tools

#4

Re: Carbide Tip tools

Andrew Spencer

One of the producers of carbide inserted tools is woodchuck lathe tools based in west Tennessee. They have recently added a 18 mm round tool that is great on the inside of bowls. Their pen tool is the best out there for the price. The inserts have a tremendous life span. The tool is great for penturners who don't want to start sanding before 400. The website is www.woodchuck-tools.com. It is great line of tools that won't disappoint anyone who decides to purchase a tool.

Re: Carbide Tip tools

#5

Re: Carbide Tip tools

GaryG in MD

Nick, I expect you know that the ones you mention are scrapers. There is another whole class of CUTTING carbide tools out there, exemplified by the Hunter tools. These are often discussed here and are completely different. I think it was very unfortunate that the AAW article only talked about the scrapers. I think we need an equal article on the cutting tools. Of course, somebody has to write it (right John?). ;-) I'm not interested in the former because they cause tearout, but I love the latter, because they remove it, or don't create it in the first place. ...Gary

Re: Carbide Tip tools

#6

Jerry Louden

Re: Carbide Tip tools

Jerry Louden

Let's take Nick's question a bit further; Where is the best place to buy replacement tips for the carbide cutters?

Jerry

Re: Carbide Tip tools

#7

Lyle Jamieson

Re: Carbide Tip tools

Lyle Jamieson

I talked to Betty Scarpino and I am doing research on the new nanograin carbide right now. I have been traveling so much that I could not get much time for that sort of thing but I have some home time coming up to get it finished next month. You will be surprised about some of the things I have discovered. We know the Hunter tools are great but I now know why.