Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

200+ woodworking book reviews

Paging Mr. Foster...

Posts

Paging Mr. Foster...

#1

Steven Antonucci

Paging Mr. Foster...

steven antonucci

Mr. Clay Foster to the front please!

I was attempting to make an obelisk this weekend with my chainsaw, and it's nowhere near as perfect as your bases are on some of your bowl pedestals. I was wondering if you did them on a well tuned bandsaw or a bandmill?

Any tips, tricks, incantations etc. greatly appreciated. I'm not sanding it.

Steve

Re: Paging Mr. Foster...

#2

Steven Antonucci

P.S.  40" tall and still at least 100#

steven antonucci

Re: Paging Mr. Foster...

#3

Re: Paging Mr. Foster...

clay foster

Steve,

Like any kind woodworking, it"s all about a sharp tool and experience. I chain saw with a crayon line for a guide.

There may be a saw shop out there that can properly sharpen a saw chain, but I haven't found it yet.

I use a file in the guide shown below. I measure the tooth length with calipers to keep them all the same. If they all aren't close to being the same length, the saw will cut ragged and jerky, or pull to one side.

Files are a consumable, like sand paper. When it's dull, replace it.

I've been sawing trees into turning blanks and art components for 20 years. The first few didn't look too good. With a sharp saw and some practice, you'll get better.

Re: Paging Mr. Foster...

#4

Steven Antonucci

Thanks for your help

steven antonucci

My saw is probably just about at capacity cutting something like this. It has a new chain in it after finding some rocks in a piece of redwood burl last year, so it is tracking straight, even if the operator isn't...

The large scale object I have in mind is probably gong to need a bandmill...and a team of men to lift it upright!

appreciate your wisdom.

Steve