Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Dye Preview Trick

Posts

Dye Preview Trick

#1

Dye Preview Trick

charlie belden

Having attended a day long demo by Chris Pytlik - mainly on his Signature Dying Process - I'm turning a hollow on which to practice. Now to me, dying a piece seems a real crap shoot, especially if you use Chris's Apply The Dye From The Inside method. I understand how the dye behaves with different grain orientations - in THEORY. But being able to visualize the effect? I can make educated guesses generally about how the dye will behave. But I can't "see" that.

We know that you can wet wood and it'll darken it a bit and show the grain and contrast between side grain and end grain areas. However, water raises the grain and it takes time for the wood to dry after being wetted.

But - alcohol - doesn't raise grain much, penetrates better than water and dries much faster.

Squirted alcohol into my test hollow form, spun it - the alcohol bled through the walls in places I expected - and in places I didn't expect. And places where I thought it would come through - it didn't.

The top row has three views of the dry sanded piece. The bottom row shows the same views - where the alcohol (and later the dye) bled through. A quick, safe and easy way to Preview a dye job.


Re: Dye Preview Trick

#2

PS - Wetting The Piece With ANY Liquid -

charlie belden

MAY (probably) cause the piece to deform - some or a LOT - and go Out Of Round.

SO - make sure you're done with the turning and sanding BEFORE wetting the piece - or risk turning through part of the wall when trying to remove inside surface ridges and/or grooves.

Re: Dye Preview Trick

#3

Re: PS - Wetting The Piece With ANY Liquid -

Dan Oliphant

Charlie,

Saw his demo last Wednesday in Bakersfield. He addressed the issue of cracking a turning using alcohol in large amounts by substuting with acetone. That will also help minimize distortion issues.

DanO

Re: Dye Preview Trick

#4

Re:Acetone

charlie belden

I don't have acetone on hand and I'd prefer to limit my exposure to acetone fumes to when I HAVE TO.

This Dye Preview requires squirting between a quarter and a half cup of alcohol in the piece while the lathe is running and maybe another quarter cup to hit spots that appear dry after the intiail application. Basically the idea is to soak the inside of the piece, spin it, and see where outside areas stay dry or damp. Well over half of the alcohol put inside gets spun out of the piece - and into the air I'm breathing - as well as on me if I'm foolish enough to get in The Line Of Fire.

Alcohol fumes in these quantities may give me a head ache. Acetone fumes in these quantities can have less healthy effects. So for Dye Previewing, I'll stick with alcohol. When it comes to applying the dye - since the quantities are significantly smaller and done in increments, acetone, as Chris prefers, will be used.

The purpose of this alcohol Dye Preview is to show you where the wood is porous enough for a dye to bleed through to the outside surface of the piece - and where it won't. It's a Visual Awareness thing - I can see where dye will probably go - and get an indication of by how much.

As cracking - my test sample has grain running WITH the long axis of the lathe - and the wood was really dry and spalted, I chose to do a piece in dry spalted wood to see how spalting affects the behavior of the dye penetration. My experiment indicates that some types of spalting affect the results differently than others.