From "Symbols of Person, Series 1", this is "Halo." 5 3/4 in. diameter, ogee platter, made from dyed plywood. Pyrographized with an image of the moon, gilded with 22k and 24k gold.
I've been researching/playing with various surface textures, then gilding them. All comments welcome.
This piece is a decorated version of the bowl I'm doing in one of my demos -- the Color Rim Bowl. (About how to make best use of the rim patterns that develop, etc.)
Not turned off-center -- instead, the blank is cut on the diagonal, which gives lots of opportunities for experimentation.
Very nice platter. The swirling colors are striking and I love the touch added by the gilding.
I have a request and a question: First, could you post a picture showing the platter's profile? And, second, where do you get the dyed plywood for your blanks?
Sorry it's taken so long to reply -- I've been a busy bee working 16-hour days getting ready for Turning Season.
A good profile is indeed essential for the canvas of these works. This one has an ogee shape with tiny foot. The inside curve is slightly undercut. (I'm sorry for the dreadful photo -- the lightened areas on the right and left are due to light reflection off the surface of the box).
And while I'm at it... I'll post a pic of the reverse as well: Crescent moon produced by turning, the star is pyrographized and gilded. (The writing just says "Halo" K. Kowalski, 2011).
To answer your question: I get most of my dyed plywood from Cousineau Wood Products: www.cousineauwoodproducts.com. (Contact Curtis Cabaniss curtiscabaniss@aol.com). They sell blocks, dowels, etc. I buy all of mine in full panels. (The product is called "Spectraply" -- non-resin-impregnated material.) They're very flexible on time and color, so you can order custom panels and have them delivered quickly.
Rutland Plywood also sells "Colorwood" -- ordering in panels can be cost-prohibitive, (I'm not sure if they still have a minimum or not), but there are retail outlets -- I think Craft Supplies, HUT products, and a few other places sell bottle stopper or rolling pin blanks... you may be able to ask them to cut a larger block for you.