Here's a couple of things I made this past week. The first is a mini hollow form turned and burned, then dyed with black leather dye. Finished with spray Crystal Clear Krylon then knocked the shine back with 0000 steel wool. it's about 2" diameter.
The other piece is a cherry box with a hammered copper lid and a cherry "finial". The design was done with a micro skew burning tip and a tiny ball tip for the texture inside the design and on the finial. Danish oil finish. The finial is pinned with a short rod of 1/8" copper tube that comes through the other side and has a decorated sphere securing the other side. I heated the copper red hot to soften it and formed it over an end grain form I turned on the lathe. I really love the colors that come from the heated copper.
I'd really love to take a class on shaping and forming metal. Particularly chasing and repousse'. It's a lot of fun putting wood and copper together. The box is about 3.5" tall.
NICE is independent of size - as you've clearly shown. Taking a technique BIG or small present challenges that you've already overcome at "normal size". Appears you've overcome those challenges for "small".
You can get into chasing and reposse with just a few basic tools, most of which you can make. But a "chasing hammer" is probably something you'll need to buy. It's a specialized hammer that works for chasing and reposse.
I have some jeweler's punches and dies for making domes I'd be glad to lend you if you're interested. I think I've got a spare chasing hammer you can have as well. E-mail me and I'll send you some photos of what I'm talking about.
Thanks Mike, Yes, these pictures were huge files that I crunched down in order to fit here. I'm going to try to take some more today in a smaller file size so the details show up better here. I should always remember to take both sizes.
I took some smaller sized pictures that are better for posting. They show a bit more detail on the cherry box and the inside of the lid. The sphere is merely a decorative work around a technical problem of not knowing how to or not being very good yet at soldering the copper finial stem to the lid.
Charlie that's very sweet of you but I have a wide assortment of chasing and repousse' hammers and tooling, I just don't know what I'm doing with them! I bought a pitch bowl and pitch and have played around with it. I've got some books and have been reading up but nothing will beat submersing myself in a class for a week.