Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

I love WoodCentral

Posts

I love WoodCentral

#1

Steven Antonucci

I love WoodCentral

steven antonucci

This place is great. It is a virtual community before FaceBook was even being thought about, and it never ceases to amaze me in the types of opportunities that present themselves to our membership.

A few days back, Ricc Havens listed an extra Nova lathe section for sale or trade, so I contacted him to see if we could work something out. His box had the extra lathe section in it, mine had some underutilized tools that I had multiples... a deal was struck.

I personally believe that Ellis' ability to attract quality people to the site makes this all possible. Ricc and I both shipped a lot of stuff across the US completely without having every met, based upon our participation in WoodCentral, knowing that we were both men of our word. Truly awesome.

When the UPS truck pulled up, I ran up the stairs after dumping a phone call with a buddy of mine (who understood) to let the guy into the shop. Here i the money shot:


To go from 23" between centers to 43" between centers and know that you'll never get turners elbow again... priceless!

Steve

Re: I love WoodCentral

#2

Re: I love WoodCentral

Stuart Johnson

Steve, is there any concern about the extension hanging off the end and supported? I've got one but have never mounted because I haven't gotten around to rebuilding my stand.

Re: I love WoodCentral

#3

Sweet!  Nice score.

Greg Haugen

Wood Central is great! The woodworking community as a whole is a great place.

Re: I love WoodCentral

#4

Steven Antonucci

Long term plan

steven antonucci

If I was going to turn a spindle (baseball bat, balluster,etc), I have no doubt that I could get away with it as you see it. There are two 10 mm bolts holding it up, and it is rock solid.

If I decide to make a large hollow vessel, I would probably built some kind of deadman assembly to transfer the load to the floor.

For now, I just needed somewhere to put it, and I wanted to see how it looked :)

Steve

Re: I love WoodCentral

#5

That'll do nicely.

Don Orr

Re: I love WoodCentral

#7

Re: Long term plan

Jim Sebring

When I bought my DVR xp 2 1/2 years ago I went whole hog. I added the extension and hinge, along with the cast iron leg set. I bolted the whole shebang to the floor and added a shelf underneath attached to the legs that's weighted with three cases of 20 gauge ammo and a couple of bags of shot. The extension hangs in space as shown in the pic, but mine has not sagged one bit. The hinged section is a great place to park the tailstock when I'm working on a bowl. I just shove it out of the way.

Re: I love WoodCentral

#8

Re: I love WoodCentral

john lucas

I'm going to add one to my Nova Comet mini lathe but I think I'll see if I can make it easily removeable and add a 45 degree brace that is also removeable. On that lathe I won't need it very often but want the capability because it is portable.

Re: I love WoodCentral

#9

Re: I love WoodCentral

Barry Irby

I added a section to my DVR about five years ago. Tim Geist who was the Tech Rep at the time suggested just bolting it on. Said it would be fine. Apparently he was right. It seems to be solid and as good as the day I installed it. I turn mostly bowls and HF's but wanted to do some table legs. Now it mostly serves as a parking place of the Tailstock, but I like having the capacity. I also had/have a home made swivel I used to use for the TS, but its in the drawer because I don't need it anymore.

Re: I love WoodCentral

#10

Re: I love WoodCentral

Mike Foster

Sweet Steve. Now you can use it with your boring bar set-up. :D

I have to agree that Ellis has provided us with a great venue. I have considered venturing into the facebook world, but so far have resisted it for a few reasons. I find sites like this fills my needs just fine.

Re: I love WoodCentral

#11

Re: I love WoodCentral

dick gerard

Just one among dozens and dozens of resons to send some monetary support to Ellis. Think about what we would do/how we would cope, if Woodcentral went down because of rising expenses. I'm a monthly supporter, are you all?

Re: I love WoodCentral

#12

Ellis Walentine

Music to my ears

Ellis Walentine

Thanks for the kind words, Steve. It's always great to hear success stories!

Ellis