Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

3520B problem

Posts

3520B problem

#1

3520B problem

Keith Inscho

Has anyone had a problem with the power pulsing? I can be roughing at a fairly low speed and the power will pulse. I can turn it up a little and it will quit and then I can slow it back down and its fine. It doesn't happen every time but it becoming more frequent. Any ideas?

Re: 3520B problem

#2

Re: 3520B problem

Bill Turpin in WNC mountains

Speed potentiometers are fairly susceptible to moisture and dirt on the inside. The wiper arms are somewhat delicate. Try to blow the dirt from the inside with power removed. You might want to replace the pot if problem continues. Be sure you match the ohms, available at Radio Shack.