Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

Nova 3000 bearings

Posts

Nova 3000 bearings

#1

Nova 3000 bearings

john lucas

I need to replace the bearings in our clubs Nova 3000 lathe. Anyone know where to get them. I understand they are a common size so i might be able to remove them and find them locally. I won't be near the lathe for a few more weeks. Just thought I'd ask before I get started.

Re: Nova 3000 bearings

#2

Re: Nova 3000 bearings

Ralph Lindberg

John

I would contact Customer Service (Florida or New Zealand) and get the specs for what you will need to buy, then find a source for them

Re: Nova 3000 bearings

#3

Re: Nova 3000 bearings

Jeff Willaford

Most bearings have a manufacturer and part number stamped on the edge of the race. Should be simple to cross-reference once you have that info....IF they are standard bearings.

Re: Nova 3000 bearings

#4

Re: Nova 3000 bearings

D. Hansen

John call "Bob" at Teknatool in FL. 1866-748-3025. There was a NZ teck rep there yesterday someone should be able to help. Then contact BOCA Bearing also in Florida they will have the part.

Re: Nova 3000 bearings

#5

Re: Nova 3000 bearings

Jorge Casta�eda

John,

When mine went on their 3rd year, I live in boondocks, no way to drag the lathe out, so I bit the bullet and disassemble the head, the one on the pulley came out very easy, the one with the spindle was more challenging but came out too. I took them to a bearing store in a city and they found me equivalents as they did not carry same brand, the original were not sealed, so I did upgrade to sealed ones, they were not expensive and they are still working smooth and quiet.

Re: Nova 3000 bearings

#6

thanks   bearings are on order, $16.95 each

John Lucas