Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Oval Table

Posts

Oval Table

#1

Richard Allen

Oval Table

Richard Allen

A week or so ago I asked for some help on an oval table. Some folks mentioned that the support should be either 4 legs or one pedestal.



So here is the finished table. As you can see I went with the double pedestal. I had a lot of bleed with the paduak into the maple. I learned a few things making this table which will help me make the next oval table. This one is 32" high.

Re: Oval Table

#2

Beautiful!

Don Orr

Re: Oval Table

#3

Keith Tompkins

Re: Oval Table

keith tompkins

Hi Richard, it turned out well! One tip on the maple....sand the top, then blow off with compressed air. Tape the surface, leaving only the maple exposed. Spray a sealer coat on the maple, then finish as usual. It should help.

Re: Oval Table

#4

Richard Allen

Re: Oval Table

Richard Allen

Thanks for the kind words Keith. I like how the table turned out.

I know about the putting a sealing coat. That is a skill I should develop. All woods seam to have something to teach us. Teach us things which will help us with other wood.