Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

Off Topic Finish Question

Posts

Off Topic Finish Question

#1

Off Topic Finish Question

Tom Collins

My daughter is making a couple trivets for birthday presents. She has painted a 6" square piece of ceramic tile and wants me to make a small wood frame to surround the tile. I will leave the tile proud of the wood frame by a small amount. My question is, what type of finish should I use on the wood that will withstand the heat? I will probably be using black walnut since I have a lot of it lying around.

Thanks,

TomC

Re: Off Topic Finish Question

#2

Re: Off Topic Finish Question

Greg Haugen

Tom,

My thought would be to go with an oil finish instead of a "membrane" finish like lacquer. The wood itself will be more resistant to the heat than any finish on top of it. Once a membrane finish is compromised, it's done. I'd look at a finish like Waterlox or a good "quality" danish oil, (the "brown can" by the "other" company danish oil is not quality in my opinion). Let it cure, and it will hold up well.

Hope that helps.

Re: Off Topic Finish Question

#3

Re: Off Topic Finish Question

Ray - Middletown, IN

I've made a bunch based on the old Wood mag design, and as usual I was behind so I just sprayed them with Lacquer. Been holding up for several years with no complaints, wife uses them on a regular basis.

Ray

Re: Off Topic Finish Question

#4

Re: Off Topic Finish Question

john lucas

I use an oil finish on my trivets but in your case it won't matter since all the heat will go to the clay. There will be an air gap between any pan and the wood so I don't think you will have a problem unless you use something that is heat sensitive like lacquer or shellac.

Re: Off Topic Finish Question

#5

JL

Re: Off Topic Finish Question

JL

I've actually seen some things that work well. I've a friend who makes kitchen cabinets professionally (among other things). He uses a 2 part conversion varnish that sprays on. It is quite heat resistant.

The drawback is that it MUST be sprayed.