Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

Here we go again.....

Posts

Here we go again.....

#1

Here we go again.....

Dave Belser

About 1 1/2 on each side, 25 wholes/side, 75 total.

Just getting started with this idea and this is just a study to see if I can drill the holes.


Re: Here we go again.....

#2

So how yah going to turn that???

Galen Vetterick

Re: Here we go again.....

#3

The same way I turned my other sparse matrixes 

Dave Belser

Re: Here we go again.....

#4

I'm still stumped on the stick ball! 

Galen Vetterick

Re: Here we go again.....

#5

Keith Tompkins

Re: Here we go again.....

keith tompkins

Lemme' see....alternate black and white "dowels", glue in place, and turn?

Re: Here we go again.....

#6

Re: Here we go again.....

Dave Belser

I actually managed to get this done with no extra supports. Drill the two side faces first and then the end grain. To turn it I'll probably fill it with wax first.

The cool part is this only took a few hours instead of a few days. So at the scale I want to work at it should be days instead of weeks.

- Dave

Re: Here we go again.....

#7

Steven Antonucci

You call that challenging?

steven antonucci

C'mon Dave... you can do better that that!

I want to see you produce the thing you drilled out (intersecting rods), turned into a hollow sphere with a cube inside.

That ought to keep you busy for a bit...:)

S

Re: Here we go again.....

#8

No problem....

Dave Belser

And I'll make the rods out of rice or spaghetti.

OK, not sure about the cube inside but rods are definitely a cool idea.

Thanks.

Re: Here we go again.....

#9

Steven Antonucci

Cool idea, but cause you a brain-ache!

steven antonucci

I thought about it for about 5 minutes and I couldn't think of any way to produce it in one solid piece of wood. You could potentially figure it out with other media and other non-lathe processes (pretty simply, I think), but wood made my brain ache...

S