Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Have a question? Ask Woody!

Turning tools w/o handle

Posts

Turning tools w/o handle

#1

Turning tools w/o handle

Kelly in Port Orchard

I'm looking for a source of turning tools that are sold without handles. I decided that I want to replace some old tools and I want to turn my own handles from some extra woods that I have in the shop. I did some looking on the internet and didn't find much on turning tools w/o handles. Thanks for your help.

Re: Turning tools w/o handle

#2

Re: Turning tools w/o handle

Ian Jeffcock

Thompson Tools

Re: Turning tools w/o handle

#3

Re: Turning tools w/o handle *LINK*

Doug Trembath

I agree with Ian, Doug Thompson makes some great tools at a reasonable price. Link is below...

Doug Trembath


http://www.thompsonlathetools.com/

Re: Turning tools w/o handle

#4

Re: Turning tools w/o handle

Craig Daymon

There are quite a few manufacturers that are now offering their tools unhandled. (Some have been offering them this way all along.) Many are available from the turning catalogs such as Packard, Craft Supplies and Penn State.

P&N

Sorby

Mastercut (Oneway)

Doug Thompson

Penn State Industries

Penn State only sells Penn State tools, Doug Thompson only sells Doug's tools, Packard sells all of the other and maybe a few more.

I believe Craft Supplies sells all the others as well. They list the Sorby unhandled tools in association with the Sorby handle system, but that won't stop you from making your own handle for the tools they offer.

When I did a quick look, I could not find the unhandled gouges on the Penn State site, but I know they carry them. They are also introducing a handle system, which will require unhandled gouges. (Personally, I'm not that impressed with the Penn State handles and have replaced a number of their handles with my own.)

-Craig

Re: Turning tools w/o handle

#5

Steve Kubien

Re: Turning tools w/o handle

Steve Kubien

Thompson Tools. Great steel which holds its edge very well. Plus, Doug is a heck of a human being and I prefer to support excellent people.

Re: Turning tools w/o handle

#6

Re: Turning tools w/o handle *LINK*

Fred Holder

I suprised that no one mentioned D-Way Tools. Dave Schweitzer is the owner and designer. He has some very good tools, made from excellent steel, and heat treated well. He happens to be local in my state of Washington. He sells his tools without handles or can supply handles.


D-Way Tools

Re: Turning tools w/o handle

#7

Re: Turning tools w/o handle

Bill Neddow

Go with either Doug Thompson or D-Way. They are the best of steels -- far better than other tools on the market -- and generally cheaper than the others. They are selling to you direct -- so there is no middleman mark-up.

Re: Turning tools w/o handle

#8

Re: Turning tools w/o handle

Ralph Lindberg

2nd on Dave's tools. I have a set of his beading tools, the only 1/16 inch beading tool I am aware of

I also have one of his skews.

Dave's tool arrive SHARP and are honed and buffed

Re: Turning tools w/o handle

#9

Bill Blasic

Re: Turning tools w/o handle

Bill Blasic

Thompson Tools are my tools of choice and you cannot beat the warranty - The simple satisfaction guarantee: If you don't like the tool for ANY* reason I'll buy it back!

Bill

Re: Turning tools w/o handle

#10

Ken Vaughan

Hunter Tools too.

Ken Vaughan

Mike sells tools bare as well as with a handle.

Re: Turning tools w/o handle

#11

Re: Hunter Tools too.

Kelly in Port Orchard

Thanks everyone for all the information. Really appreciate it. Have a great weekend!!!