Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

My worst demo ever.

Posts

My worst demo ever.

#1

My worst demo ever.

john lucas

Ever do a demo and get everything wrong. It was a box. I started it wrong. Cut that off. Went back and turned the top. I was turning the tenon to fit the lid back on and got it too small. Some CA build up solved that problem. Turned the lid and removed it. I barely had enough wood to finish the bottom. By then I had lost the crowd. I think they weren't interested in that style box anyway and me screwing it up didn't help.

I did have a good one on one kind of demo afterwords with new turners on how to turn a cove and what the bevel is and how tools worked. I guess that made it worthwhile.

It must have been because I had a very long day and didn't get to eat before I went over. I won't do that again. I usually pride myself in making a demo go really smooth. Not so tonight. I guess every now and then you have to screw up to make the good ones better.

Re: My worst demo ever.

#2

Hang in there buddy

Dave Peebles Lyons, Ohio

Sometimes the turning Gods are against you.

All that means is you had a rough day. It is obvious that you are a talented turner.

The best thing that happened was you showed all the new turners that anyone can have a bad day. They will remember that even the best can have an off day.

Dave

Re: My worst demo ever.

#3

Steven Antonucci

Learn by failing

steven antonucci

I subscribe to the thought that we only learn via failure. If you did everything perfect, you are a machine. If you have a few little hiccups, you pick up a little knowledge.

I would personally suggest that a demo that was less the flawless is actually more valuable to a new turner audience. First, it gets them past the thought that "I could never do that" since they see you make the same mistakes they do. Secondly, it teaches them how to think on their feet, which is the true mark of an experienced turner.

I have started teaching and I absolutely start by letting the students go down the wrong path. When they hit a wall, we all stop and discuss how we got there and how we can fix it. Finally, we discuss how to avoid making the same mistake twice.

You had a teaching moment in a demo. Really, I think it was a pretty good demo by your description.

S

Re: My worst demo ever.

#4

Betty Scarpino

Re: My worst demo ever.

Betty Scarpino

John, at least you know you could do a better demonstration! I have attended sessions where it's obvious that the demonstrator does not have a have a clue that his or her presentation is messed up, lack-luster, or simply lacking .....

Good luck next time achieving your high standards. Like the others said, there's nothing like learning from a negative experience. Been there, big time!

Re: My worst demo ever.

#5

Dick Hines

Re: Learn by failing

Dick Hines

John, you have set your self up for your demo at Ed Moore's club. I know Ed will be easy on you though. :D

Take your ear plugs.

Re: My worst demo ever.

#6

Re: My worst demo ever.

Jake (SoMN)

As a new turner, I would learn more from a demo where something goes wrong...and then from how you tried to salvage the piece. An accomplished turner can make the hard look easy, and it rarely turns out that way for a new turner. As for myself, I can make the easy look impossible.

People go to demos to learn something. If it all looks and goes easy sometimes all that is learned is that the person doing the demo is a better turner than the ones watching it.

I would hazard that many watching learned more than you think.

Jake

Re: My worst demo ever.

#7

I used to strive to be a bad example

john lucas

I figured that I could be the bad example so everyone else could learn from me. Apparently Charlie Sheen has me beat. :)

Re: My worst demo ever.

#8

Re: Learn by failing

john lucas

Ed will keep me straight. It will be like doing a presentation at the blackboard in front of the teacher for a grade. No pressure, just gotta remain cool. Looking forward to seeing Ed again.

Re: My worst demo ever.

#9

Re: I used to strive to be a bad example

Galen Vetterick

John

At the 2009 Albuquerque symposium I watch J. Paul Fennell demostrate turning a hollow form using a fiber optic light to check thickness. Probably a demostration he would like to forget too as he cut through the wall of his hollow form.

I understood the principals of what he was demostrating but also learned that even with 40 years of turning experience things do not always work out as planned. His comment was on the density or lack of transparence of the wood.

In my mind I also thought he would not be working under the bright demostration lights as much as he did that day.

I still learned a lot from his demostration and I am sure those who watch you did too.

Re: My worst demo ever.

#10

Re: My worst demo ever ever ever .

Terry Scott

John yes been there didn't eat before I went Had already worked 60 hours in my day job Even the drive was done in a rush

No time for prep

Got lost so was late

The power went of half way through

A piece came out of the chuck not once but 3 times

Then to top it of it was a bitter winter night (when the night seems to come down to the road and raining hard )I turned left instead of right coming out of the venues gate and got so lost it took me three hours to get home instead of an hour

Had a 5.30 start the next day or should I say the same day as I got home after midnight

I sent the cheque back for the demo fee saying keep it for next time .I have been invited back many times and each time the ice breaker is how I got lost

Re: My worst demo ever.

#11

Re: My worst demo ever.

Dick Wilson

My worst demos were in my club. There are a couple of "friends" who just can't keep their damn mouth shut and want to tell me what "I am doing wrong" or even come to the front of the room to show me. I have talked repeatedly to them....they can't help it, it is in their genes. The last time I got nasty. I won't do a demo again. Demos at other clubs are great. Everyone is polite and ask questions.

Re: My worst demo ever.

#12

Brad Vietje

Been There, Done That!

Brad Vietje

Hey John,

I hear ya load and clear. If only... if only... Probably everybody who does lots of demo's will have a bad one at some time.

What I hate is the "If only I had ..." feeling. You know you could have done better, and you always have done better. The other thing to remember is that you always will do better!

Like others wrote, you showed how to recover after things don't turn out, and how to stick with it to the end. That's valuable, too. Making sure we are relaxed and well rested is difficult, and sometimes beyond our control. We get up there and share what we've learned, and people probably go away with more from it than you think. Chalk this one up to a bad day, and hit the ball out of the park on the next one.

Safe spinning,

Brad Vietje

Newbury, VT

Re: My worst demo ever.

#13

Keith Tompkins

Re: My worst demo ever.

keith tompkins

John, You've had to deal with a lot of emotional stuff lately. It's hard to focus, and be your usual self when too much is going on. Even if mistakes don't bother the audience, you know yourself it's not going right, and it affects the outcome even more. If I get flustered, it's hard to regain my composure...like getting a skew catch during a demo at the nat. symposium. I did the unthinkable....letting the skew touch the wood before it was on the toolrest. No explanation can fix that. Hey, Babe Ruth struck out many more times than he hit home runs....and he's immortallized in history.

Re: My worst demo ever.

#14

Re: My worst demo ever.

john lopez

I reviewed the Richard Raffan / Del Stubbs instructional videos recently.

Both of them are world class masters and both made mistakes during their presentations...

The mistakes were not deleted in the final edits.

They have the integrity to leave them in and the wisdom to use those mishaps as teaching tools. ( also channeled into some comic relief )

The unfortunate part of a demo gone wrong is that when something goes wrong

the student may not see the project completed.

A complete rebound / recovery may be impossible for a presenter but remember

that your viewers come from all levels of skill and most will still have a great deal of respect for you and your skills .

Re: My worst demo ever.

#15

Don't be hard on yourself........

jake Niedling

John,

I have seen alot of your demo's over the past 10 years at both the crossville & Knoxville clubs. They have always been done very well. The information you share is way and above everyone's expectation. So I think it was perhaps better than what you thought. I know I always enjoy watching you.

Jake

Re: My worst demo ever.

#16

Jim in Burlington Ont.

Things Happen...

Jim in River Oaks, Ont.

I can remember helping a turner with their first ever demo, pen turning at a Woodcraft store. They had no experience at all in teaching and thought it would be a walk in the park. I had a lot of experience teaching adults, creating a teaching plan and organizing a class. I let them do what they thought was appropriate but in the background I silently took care of things with the students. To this day I am sure they have no clue how close they were to a train wreck all class, sometimes you just need to step back and take account of what matters rather than being focused on the stage. I am sure this person still has no idea how simple things can slide sideways.

John, you are a gifted teacher and you know what you need to change, that makes you an excellent teacher, knowing and doing always rates over being disconnected.

Take care,

Jim

Re: My worst demo ever.

#17

Re: My worst demo ever.

Dick Coers

It's really tough keeping a crowd when making a box when it goes well. All that fitting for lids and jamb chucks gets pretty boring. Don't let it get to you John, your job was just to get them interested in trying it themselves one day.

Re: My worst demo ever.

#18

Re: My worst demo ever.

Vince Welch

Hey John,

You know what this means... tomorrow when nobody is around you will have a perfect day of turning!!!

Re: My worst demo ever.

#19

Re: My worst demo ever.

john lucas

Vince It went perfect the week before when I did a test run. Since I had not turned since Dec. I thought I should run through it just to remember how to do it. Apparently didn't work. Of course I'll do a perfect one this weekend when I do it again. I'm using this as a filler demo for the Blue Ridge woodturners just in case the other demos don't fill the time. I doubt it. I'm covering a lot of stuff and will probably fill all the time they give me. More than likely they will be kicking me out the door saying aren't you don't yet. :)