Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Almost ready to get back to turning again.

Posts

Almost ready to get back to turning again.

#1

Almost ready to get back to turning again.

John Lucas

I'm that close (hold fingers about 1/4" apart) to getting back in the shop to turn. I've worked on the other house now for 2 months several nights a week and most of the weekends. I finally paid someone else to do the kitchen and living room floors. I ripped out all the bad flooring but I let him put in the new stuff and lay the tiles. He's going to sand and refinish the hardwood floors. I still have some appliances to repair, redo the downstairs commode and fix whatever is wrong with the outside lights but everything else is about done. Whew. I do have to finish cleaning out the shed. Anyone need a lot of wood sized for picture frames?

I have a large stack that I picked up when another woodworker passed. He roughed out his lumber and milled and stacked it. I've had it for 10 years or more. don't even remember what all is there. It's about 1" thick about 20" long and about 2" wide. All varieties with some bark edges left on.

I am doing a demo tonight for our local club on making a miniature sewing kit or pill box. I made a box last night so I could remember all the steps.

I'll be doing a demo for the Blue Ridge turners in Fincastle Virginia on the 12th. I'll be doing my hand mirrors, threading, and sharpening and if time allows one of these pill boxes.

Re: Almost ready to get back to turning again.

#2

Walt Bennett

Re: Almost ready to get back to turning again.

Walt Bennett

You don't know how much I can identify with you . . . I've been spending most of my 'spare' time gutting and beginning a surprise renovation of our master bath area. So far I've got all the old stuff out (including several walls) and just started framing the new stuff. I've too got a contractor to do some of it, but since this was totally unbudgeted, I'm stuck with most of it myself. My lathe sits in my garage shop surrounded by plywood, 2x4's, a toilet, boxes of tile, etc. Bummer!

Re: Almost ready to get back to turning again.

#3

And the Blue Ridge Woodturners are ...

Ed Moore in SW VA

looking forward to seeing your demo on March 12. Lord willin' and the creek don't rise I'll be there. I promise to not wear dark sunglasses and giggle at odd unexpected moments. :D :D

Looking forward to seeing you,

Ed

Re: Almost ready to get back to turning again.

#4

Ed   I was hoping for a Heckler   

John Lucas