Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

VPS-Level Performance. Fully Managed. No Hassle.

Cutting Edge Exibition (and Gloat )

Posts

Cutting Edge Exibition (and Gloat )

#1

Cutting Edge Exibition (and Gloat )

Terry Scott

Cutting Edge at Pataka, Porirua http://www.pataka.org.nz/

Congratulations everyone a great show

I feel very honored to have had one of my works accepted for this juried exhibition being placed along side so many top NewZealand wood artists.I am still pinching myself

http://www.naw.org.nz/gallery/Porirua_2011/cutting_edge/inde

x.html

Pataka Museum

CUTTING EDGE EXHIBITION

Entry details

Submitted work

As the title of the exhibition suggests, work submitted should reflect standards of excellence. It is not the intention to be overly prescriptive however the work should be stunning in concept and form and where appropriate have a Wow factor � in simplicity, in use of wood colour/grain, in design, in the substance of the work. We are looking to showcase the best of turned wood art in New Zealand.

Re: Cutting Edge Exibition (and Gloat )

#2

Congrats but...

Toney Robertson

the fact that you were chosen is not really a surprise to me since your pieces are among the nicest, coolest and most cutting edge pieces that I have seen on the web.

Re: Cutting Edge Exibition (and Gloat )

#3

I agree with Toney

Randy Gleckler

Congrats it's very well deserved you do amazing work and it should be of no surprise you were accepted as the work you do is just fantastic and an inspiration to me and likely many on here.

Re: Cutting Edge Exibition (and Gloat )

#4

Steve Kubien

Re: Cutting Edge Exibition (and Gloat )

Steve Kubien

Well done Terry. Much deserved. On a per-capita basis, I doubt any country has the number of high-quality turners/artists as New Zealand.

Re: Cutting Edge Exibition (and Gloat )

#5

Leo Cuellar

Congrats, the only real surpise...

Leo Cuellar

Terry, is that they haven't made your works the subject of a special exhibit!

Re: Cutting Edge Exibition (and Gloat )

#6

Re: Cutting Edge Exibition (and Gloat )

charlie belden

It's a good thing that you're humble since you work humbles the rest of us.

Pushing the boundaries of what is possible is one thing. To then refine things to the n'th degree is even more impressive.

Congrats and I'm sure you will do well in the competition.

Re: Cutting Edge Exibition (and Gloat )

#7

Re: Cutting Edge Exibition (and Gloat )

Terry Scott

Charlie

This isnt a competition

many of us were hesitant to put forward a selection of works as we didn't fully understand that this (a first in Nz ) is a display to lift the profile of woodturning

Works can be for sale however this is not advertised .I guess there will be quite a bit of Googling going on as the only reference to the pieces is the name of the artist and the works title.

Anything that promotes woodturning Ill gladly support what ever the cost

Cheers

Everyone thank you for your kind words I am overwhelmed by your support

Re: Cutting Edge Exibition (and Gloat )

#8

I believe that "down under" turners....

JamieDonaldson

...are making some of the most creative contemporary turnings in all the world. We are fortunate that Terry and others are willing to openly share both their techniques and artwork products with us, a benefit of the 'net that allows global access from the comfort of our chairs! :D

Re: Cutting Edge Exibition (and Gloat )

#9

Keith Tompkins

Re: Cutting Edge Exibition (and Gloat )

keith tompkins

Congrats, Terry. Was there ever any doubt? You are the man! Best of luck in the show!

Re: Cutting Edge Exibition (and Gloat )

#10

Steven Antonucci

Shoot a video and raise your prices

steven antonucci

Lord knows that if I wasn't impressed with the work alone, I'd have to be impressed watching you stand there with all of that wood whizzing about. Heck, you could probably get some extra bucks for hazard pay...

S

Re: Cutting Edge Exibition (and Gloat )

#11

Re: It's already been said...

Donna Banfield

but it deserves a repeat. The work that you do puts so many of us in awe that you deserve every kudos that comes your way. It is an honor that is befitting your talent, skill and especially your humility.

I sometimes think that you don't really believe how good you are! And I mean that with the sincerest of all intentions. You really are, in my book, in the top 5-10% of world class turners.

Re: Cutting Edge Exibition (and Gloat )

#12

If Terry put a video of himself turning.......

JamieDonaldson

.,...some of his multi-axis process up on YouTube we would have to report him to the safety police!!!! :D

Re: Cutting Edge Exibition (and Gloat )

#13

way to go Terry!

GaryG in MD

I agree with what everyone else has said. It doesn't get any better. Congrats. ...Gary

Re: Cutting Edge Exibition (and Gloat )

#14

Don't pinch too hard...

Ronny Eelen

... or you might wake up.

No, really, congratulations. You work deserves this.

regards

ronny

Re: Cutting Edge Exibition (and Gloat )

#15

Re: Don't pinch too hard...

Terry Scott

Hey Ronny maybe if I did wake up I might finally manage to do some nice turning.

:\ l.o.l Yet I do have some nice dreams

Re: Cutting Edge Exibition (and Gloat )

#16

Re: Don't pinch too hard...

Ronny Eelen

Always the modest guy.

Wake up! You are good.

In fact, when you get another dream come true and turn up with another fabulous piece, our (or at least, my) dreams just start: whishing we could do the same.

So, you should write a book, Wood Dreaming, part II, as a follow up on the book of the other Terry.

And make a DVD, showing how you do all off these beautifull pieces, documentary style.

Or a set of DVD's, 'Terry goes wild', like Jimmy Clewes...