Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Personalized Wooden Watches, Engraved Free

An interesting perspective on Youtube

Posts

An interesting perspective on Youtube

#1

Steven Antonucci

An interesting perspective on Youtube

steven antonucci

Take a minute to watch this video.


In it, we can see what looks like an OSHA nightmare. No safety precautions at all, but watch the guy turn and it becomes immediately apparent he knows what he's doing.

I guess that begs the question: is it bad to post an "unsafe video" when it may only be unsafe for ANOTHER turner, but not the person turning it?

Steve

Re: An interesting perspective on Youtube

#2

He's wearing safety glasses

Adrien

Re: An interesting perspective on Youtube

#3

Re: An interesting perspective on Youtube

Doug Trembath

OSHA doesn't apply in other countries, and I'm sure there are many folks happy about that. Aside from the lack of a cover for the lathe drive, and the lack of dust collection, it looks like my shop...

I don't read Spanish (?) well enough to know where he's located, but have been in enough shops around the world to say this one's way better than some.

I'm all for guarding equipment, especially today since I had removed the guard on my jointer to do a quick rabbet last night, and didn't think to replace it immediately. First thing this morning, stuck the ends of two fingers into the spinning blades. Not bad, just a reminder, but still, I'm here letting the bleeding stop so I can bandage them properly, then go back out there and put the guard back on.

First real injury since 1980. Go figure!

Work safe!

Doug Trembath

Re: An interesting perspective on Youtube

#4

Re: An interesting perspective on Youtube

Dick Wilson

The guy is good. I suspect he has turned thousands of these in the past. When you can turn a piece with no detail pencil lines and match one after another your dog gone good. One thing I noticed is that he is using beefy tools that are very sharp by the looks of the wood he is quickly hogging off with clean surface. I suspect he is using some type of soft wood by the looks of the sawdust coming off as he sands.

Re: An interesting perspective on Youtube

#5

Re: An interesting perspective on Youtube

glenn roberts

Correct me if I am wrong, but if you watch him closely, at the start he appears to put earplugs in and if you stop the video ( about half way through) you can see him wearing yellow tinted safety glasses. He takes his glove off to sand (when his hands are close to the work) His lathe seems to be fitted with a foot clutch, so would add a 'safety' feature.

So, yes his lathe doesn't have guarding, he doesn't have a face shield, but its a bit fit unfair to suggest he doesn't have any PPE etc.

It is a shame that safety around the lathe etc is not always taken more seriously.

Re: An interesting perspective on Youtube

#6

Mike Stafford

He has been lathing for more than one month....

Mike Stafford

I would say he is highly skilled.

Re: An interesting perspective on Youtube

#7

Joe Fleming

Re: An interesting perspective on Youtube

Joe Fleming

Looks like there is dust collection. We don't see any hoods like we expect, but if you watch the dust, it is moving to our right very strongly. Something is sucking, blowing or both. Joe

Re: An interesting perspective on Youtube

#8

Re: An interesting perspective on Youtube

Barry Ward

I'll agree that he is an awesome turner,but I think he's nuts for not wearing a full face shield,I've been wacked more than once by pieces blowing up, or just breaking loose.

Re: An interesting perspective on Youtube

#9

Dick Hines

Re: An interesting perspective on Youtube

Dick Hines

He turned the spindle so fast I had to llok at the video twice. He knows what is he is doing that's for sure.

Re: An interesting perspective on Youtube

#10

Spanish translation

Chris Hoehle

In case anyone is interested, from the YouTube profile page, it looks like the gentleman is from Mexico and the description below his video says:

"Turning a leg for a bed frame, I've practiced turning a little bit XD"