Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

New Lathe Rikon 70-500

Posts

New Lathe Rikon 70-500

#1

New Lathe Rikon 70-500

Ken Demarco

Well, I just finished turning a bowl on my new Lathe, a Rikon Woodfast 70-500, and so far I am very pleased! I bought the lathe at Woodcraft in Toledo, 3 weeks to deliver. The lathe came well packed in 2 crates, no damage from shipping. Everything went together easily. Centers line up perfectly, runs smooth with no funny noises. Tailstock and banjo operate smooth and lock easily. The only issues I see so far are, The speed read out doesnt work due to a broken wire (working with rikon on that) When they put the grub screws in on the faceplate they were very tight and messed up the threads in one spot ( a small file cleaned that up). I'm not sure I like the outboard turning attachment, havent installed it yet because i might return it and either get the vicmarc, or build one myself. The out board only allows the toolrest to move about 12 inches away from the headstock, and I would like to have something that allows more depth.


Ken DeMarco

Re: New Lathe Rikon 70-500

#2

Re: New Lathe Rikon 70-500

David Walser

Congratulations on the new lathe! I wish you many happy and productive hours spinning.

Re: New Lathe Rikon 70-500

#3

Brad Vietje

Nice, Ken -- Congratulations!

Brad Vietje

Re: New Lathe Rikon 70-500

#4

Richard Allen

Re: New Lathe Rikon 70-500

Richard Allen

Congratulations on the new lathe. Looks like it will take finish and glue with pride ;-)

Re: New Lathe Rikon 70-500

#5

Re: New Lathe Rikon 70-500

Doug Trembath

That looks like a nice lathe, Ken!

Doesn't it feel nice to put tool to wood on YOUR new lathe?

I sure felt that way after years of using cobbled-together lathes, and finally got my Vicmarc in and hooked up. It's a great feeling while it lasts...

Have fun.

I have the Vicmarc outboard setup, and couldn't ask for anything more, I guess, and still be using realistic expectations. If it will bolt up to your new lathe without too much modification, it would have my vote. I suppose it bears mentioning to be careful of warranty issues if you have to drill and tap.

Again, have fun and enjoy it!

Doug Trembath

Re: New Lathe Rikon 70-500

#6

Steve Kubien

Re: New Lathe Rikon 70-500

Steve Kubien

Very cool and congratulations. I have wondered about this lathe because at the price and capacity, it looks tough to beat.

I have a question regarding the outboard turning..... Is the outboard spindle left or right hand thread? Seems to me Oneway and Vicmarc have done things right by making the outboard threads the same as the inboard threads so you can use the same faceplates and chucks and also continue to turn in a way you are used to. I feel my fellow Canadians at General are idiots in that they not only use LH threads but also different size threads on the outboard end (1-1/4" inboard vs 1-1/8" inboard). I would like to know if Rikon has changed to all RH threads vs what is in their literature.

Have fun!

Re: New Lathe Rikon 70-500

#7

Re: New Lathe Rikon 70-500

Dick Strauss

Ken,

Congrats on the new lathe!

FYI-I think Oneway still threads their inserts for both left and right handed threads so this shouldn't be an issue with their chucks.

Re: New Lathe Rikon 70-500

#8

Steve Kubien

Re: New Lathe Rikon 70-500

Steve Kubien

Thanks Dick. Good to know.

Re: New Lathe Rikon 70-500

#9

Re: New Lathe Rikon 70-500

Ken Demarco

Thanks everyone, yes i'm having a ball so far, so much different than what Ive been using. Yes the oneway insert is cross-threaded and i have possibly found a machinist to cross-thread some faceplates for me. I asked the folks at Rikon why they kept the LH outboard threads and they stated for safety concerns, whatever that means?

I have been looking around at options for outboard turning attachments, in addition to the vicmarc (which I havent found for sale in the US yet) I saw robust makes one that might work. fortunatly , not critical that I have it right away.

Ken

Re: New Lathe Rikon 70-500

#10

Re: New Lathe Rikon 70-500

Barry Ward

WTG on your new toy.Hope you get as good of service from it as I have gottin out of my Ricon mini that I got 4 yrs ago.Love that little bugger an there service has been great.