Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Combination Press Plough Plane

lathe lighting *LINK*

Posts

lathe lighting *LINK*

#1

lathe lighting *LINK*

rjstavran

I just picked up 2 of these lights from Menards. The 5 lights are on flexible arms and there are 3 different light settings: click once for 2 lights, click again for 3 lights, click again for all 5 lights. One more click turns them all off. I put mine in the back of the lathe and up on a 1 foot stand to get it a bit higher and out of the way. The base is pretty heavy and stable. It pretty much eliminates shadows.

Cost is $17 but you get a $7 rebate, final cost $10.

There is a limit of 2 rebates per household.


http://menards.inserts2online.com/customer_Frame.jsp?drpStoreID=1

Re: lathe lighting *LINK*

#2

JL

Re: lathe lighting

JL

I much prefer my track lighting system. I don't worry about knocking it over.

Re: lathe lighting *LINK*

#3

Re: lathe lighting

Stuart Johnson

I was just looking at something very similar at Target. They look like they can be adjusted to give good lighting. How long are the arms?

Re: lathe lighting *LINK*

#4

Re: lathe lighting

rjstavran

The lamp stands about 5 feet tall. The arms are 12-15 inches long so I am able to spread them out and at different heights to illuminate the turning from many angles - no shadows. I have put cf bulbs with varied light outputs to cover a wide spectrum. The light works like I had hoped.

Re: lathe lighting *LINK*

#5

Re: lathe lighting

woodspinner

I put a 3 light 50w each Haligin Track light over my bed lathe, I only use it to check my piece before I think it's done.It really works great to see all the little marks that don't other wise show.The trick is to only use this light at that time if you use the light all the time your eyes get use to it and it dosen't do any good for that last look.During turning I use a 4' with daylight bulbs and a Moffet 100 watt for task.This really does a great job to see your turning.

Re: lathe lighting *LINK*

#6

Re: lathe lighting

Doug Trembath

Maybe I'm missing something, but I scanned 17 pages of lamps at the link provided, and saw only one five light lamp, at $275.

Do you have a model number? Did you see it on the website or pick it up in the store?

I'd like to see them, as I think it might work for a number of areas I have need for lighting.

Thanks,

Doug Trembath

Re: lathe lighting *LINK*

#7

Re: lathe lighting

Keith Inscho

Looks like its on page 2 of the crazy days sale paper. (the one on the left)

Re: lathe lighting *LINK*

#8

Re: lathe lighting

Doug Trembath

Thanks, Keith. Bob sent me an email with more info, but it seems there are no Menards stores around here. I'll try to contact them and see if they can be ordered. (I didn't even check the sales links, just went to the inventory).

Doug Trembath