Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Sometimes YouTube is worth watching

Posts

Sometimes YouTube is worth watching

#1

Sometimes YouTube is worth watching

Dick Wilson

While searching for the video that Barb talked about (I can't find it....has it been taken down? Post it here please) I came across this video. So once in a while someone posts a video that is informative and enjoyable to watch.

http://www.youtube.com/watch?v=2uepgtBlPrU

Re: Sometimes YouTube is worth watching

#2

Re: Sometimes YouTube is worth watching

Carole Valentine

Andy Coates. Excellent video, especially for a new turner (and some of us old ones!) He has a few other videos out there as well. Bet he is a pretty popular demonstrator.

Re: Sometimes YouTube is worth watching

#3

Mike Stafford

Re: Sometimes YouTube is worth watching

Mike Stafford

There are a number of good videos on woodturning on YouTube but just like any other source of information you have to be able to sort through what is available to know what is good.

When I first started turning I would not have known what was good. I think that is true of many of us. And rather than making statements that none are good I think it is the responsibility of the turning community to periodically review what is available and call to task dangerous or ill conceived videos. Unfortunately that may not be possible because any idiot with a video camera can post virtually anything he or she wants.

This is a good video although there are probably some things in it with which someone can find fault. One thing I have learned is that there are opinionated woodturners out there...

Re: Sometimes YouTube is worth watching

#4

Oh no- where are they Mike??!! (;-O)

JamieDonaldson

:D

Re: Sometimes YouTube is worth watching

#5

Re: Sometimes YouTube is worth watching

Dick Wilson

Mike, There were a couple of turning techniques he used on the video that I would have done differently, starting out with a 3/4" finger nail grind bowl gouge using a peel cut to round it. Much faster and safer than a roughing gouge. That being said, I learned a couple of things I am going to try on my next HF

Re: Sometimes YouTube is worth watching

#6

Trouble with You tube

Nick Tuzzolino

Not this particular link, but most youtube videos stop and go, skip, and are erratic. Anyone else have this problem? Is it my computer, or are they all just against me?

Re: Sometimes YouTube is worth watching

#7

what not to do video *LINK*

Guy Bratt

Video's still there. 3 parts actually

look again for "woodturning no face plate no chuck"


http://http://www.youtube.com/watch?v=GM3QV8AJXMk

Re: Sometimes YouTube is worth watching

#8

working link  *LINK*

John Lucas


http://www.youtube.com/watch?v=GM3QV8AJXMk

Re: Sometimes YouTube is worth watching

#9

I couldn't finish watching it.

Bob Lalonde

Re: Sometimes YouTube is worth watching

#10

Re: I couldn't finish watching it.

Dick Wilson

ROMALOL!!!!! I finally found the video. When he started to use a skew to take out the inside of the bowl I had to close my eyes. I loved his novel technique of sideways ramming the skew into the turning as he went down the wall. What is really sad is his defiant "I'm not rich like you" or "you don't know what you are talking about" attitude. I reported his video as being unsafe and harmful to YouTube.

Re: Sometimes YouTube is worth watching

#11

Re: I couldn't finish watching it.

brian.mcinturff

He obviously has some skill because I couldn't be lucky enough to do it once and not get hurt. He seems to have done it several times. Someone should make a copy of that and show it at the beginning of every "Basic Woodturning" class. Sorta like all the Safety videos a lot of the Industries have to watch every year.

Re: Sometimes YouTube is worth watching

#12

Re: I'm disappointed!!

Don Evans

It's too bad this video is as old as it is or I would have sent him some comments that hopefully would have helped him.

It's unfortunate that most responses he did get were harsh and no help, only put downs.

He needs help and no where did I find anything where he indicated that he was making an "instructional video". Perhaps this was his way of asking for help but very little was offered, just harsh criticizing.

We as woodturners are suppose to help aren't we, isn't that what most of us preach?

Is there any way to send someone a private email on that site? If so I'm give him an email offering help. I assume he wouldn't see comments and I don't want to put my address on youtube publicly.

Don

Re: Sometimes YouTube is worth watching

#13

Re: I'm disappointed!!

Dick Wilson

Don, Yes, you can PM. Go to his video. Below the screen there is a like or dislike button. Under that there is a number "5937824" in blue. Click on that and it will let you PM.