Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

THE WOODRAT IS BACK!

Design: Things To Consider

Posts

Design: Things To Consider

#1

Design:  Things To Consider

charlie belden

Some things to think about - and perhaps discuss - on Design. Feel free to elaborate on anything on the following list.

Jim Rodgers, of Bay Area Woodturners Presentation

Form & Design

Pleasant continuous, no flat spots, no aburpt changes

Balance

Weightless

Golden Mean/Divided Into Thirds/Fifths

Point of interest

Floating - small foot

Curve does through the foot

Simple decoration

Form follows function

Eye movement

Smooth transition - continuity

View in context

Shape creates emotion and balance

Perceived weight

Size doesn't matter

Aesthetics

Expectation

Like if or not - first impression

We always compare two or more things, one thing vs our mind

Based on your training /experience

Conflict shape vs figure

Does it engage me?

Conscious vs unconscious

Sum of all qualities: the whole = appeal

Bring in additional senses

Demonstrate skills

Aesthetics are preplanned

Perceptions come fro our life experiences/history

Weight -function vs form

Color

- dark wood = heavy

- light wood = light weight

Figure

Touch

- gloss asks to be touched

- semi gloss/matte = just look

Emotion

- Surprise

- Perception

Culture

Personal value

- visual

- fantasy

Tactile - finger tips

Subjectivity

- sensuality / senses

- humour

- amazement

- appeal

Break the rules. If it works - it works.

Re: Design: Things To Consider

#2

Just Turn and have fun----------

jake Niedling

Charlie - I turn as a hobby and just like to make things. It is the best way for me to reduce my everyday stress from work. Other than deciding I am going to make a bowl, box, platter or christmas ornament, I just try to let my shape develop to what I think is pleasant and balanced without alot of thinking, planning, sketching or rule reviewing. Now I must admit alot of the things you mentioned happen when I turn, without me needing to think about them. I enjoy making good cuts, watching the chips fly and a finished piece come off the lathe.

Re: Design: Things To Consider

#3

Re: Just Turn and have fun----------

charlie belden

I totally understand the therapeutic value of woodturning and its ability to provide a means to actually make something, start to finish. Seeing a shape developing as wood streams off a sharp cutting edge is fun as hell and satisifying. Wingin' It, with no conscious idea of where things will go is pretty liberating.

Once one has seen and/or turned enough pieces - oneconsciously or unconsciously start to incorporate things on this list into one's turnings. Just being aware of some of the things on the list to consider can improve one's turnings. And spending some time thinking about one or two ideas on the list can open up areas to explore that one might not previously even considered.

Take just the effect of the finish - shiny = handle the piece, semi-gloss or matte finish = look but don't touch. Does that seem true? If so, how can one use that?

Does color imply more or less apparent "mass", darker = heavier, lighter = less heavy?

Can a piece be too busy, or too bland?

How important is where and how a piece is displayed? A beautifully proportioned piece displayed too high or too low can negate the proportions.

If one wants to take turning beyond just the process, some thought is required and some awareness of some of these ideas that can improve the results of the turning.

The amount of effort to go from just another turning - to a nicer or really nice turning - does require more than just turning away wood. But it requires some awareness of what makes a nice piece - or not.

There's so much to learn about turning. This list of design considerations is just some of that required acquired knowledge.