reversing them so they face out is another way that opens up possibilities
Placing on 3 differnt sized jaws has even proven to be helpful
If I can hold it Ill turn it (I havnt found anything yet that I cannot hold some how
This piece was a challenge by Alby Hall he suggested that I could turn over lapping rounds (like my wall hangings below )on the flat but what about round on round.
Here in the US, you'd have to use the other two jaws that you removed.
I always assumed that you had done that on some monumental faceplate with a bunch of strapping material. I think you need to get on of your mates over with a video camera and a long lense to post something you turn up to YouTube.
Remember that adding to the amazing work Terry does, he's doing it with his lathe spinning in the opposite direction as we northern Americans. (And hanging from his feet as well! Thank goodness he flips the pics before posting them!)
I suspect there's probably an opening for him to do a live show on the strip in Vegas. A little competition for Cirque du Soleil.
-Craig
Thanks for the post(s) Terry. Always enjoy seeing what you're doing.
I use the body of the chuck as a shoulder and then the one jaw is extended to force the work against the chuck .
The slides in a chuck make great mini jaws as well .I find these hold better that pin jaws as you can seat the work against the body of the chuck for stability
I was first introduced to the versatility of a chuck by Woody McMartin.What he does with chucks makes my jaw drop or it did 12 years ago when I attended his demonstration