Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

***Tool Grinds*** *LINK*

Posts

***Tool Grinds*** *LINK*

#1

Ellis Walentine

***Tool Grinds*** *LINK*

Ellis Walentine

Hi folks,

I've just reworked our Tool Grinds Library page and added some new contributions from John Lucas. Check 'em out. John was sparse with his comments, so maybe we can discuss some of his grinds here on the forum and distill some captions for his photos. I for one would be interested to know what the rationale is for some of those angles and shapes he uses. It's also pretty clear that he doesn't jig up for these grinds, so maybe we can discuss the pros and cons of hand grinding.

Also, remember that your own personal tool grinds are welcome for inclusion in the Tool Grinds Library, so send me your photos and comments and we'll upload them for you.

Cheers,

Ellis


WoodCentral Tool Grinds Library

Re: ***Tool Grinds*** *LINK*

#2

Thanks Ellis

Jeff Willaford

Re: ***Tool Grinds*** *LINK*

#3

Re: ***Tool Grinds*** *LINK*

Doug Trembath

Good idea, Ellis!

For those folks who haven't seen it, Mike Mahoney is working with Henry Taylor Tools to market a new Signature set for bowl turning. I happened upon it while researching for a demo I'm doing tomorrow. I'm impressed!

Mike and I have known each other since the '90's, and I've followed his developments closely, along with Stuart Batty. I have taken classes with both of them 'way back, and am proud to call them friends. That being said, though, the latest bowl turning setup Mike is showing is really effective for bowls. I think it works best with "U" shaped fluted bowl gouges, over my usual preference, the "V" shaped flute, but I set up some tools I have had for years just for bowls over the last couple of days, and I am really impressed with the geometry and cutting actions. I'm getting way better results with this regimen than I did before, and I hope I'm not tooting my own horn too much, but I've made some really nice bowls that sold well, and were gone long ago.

Obviously, I am not promoting Mike, and have no interest other than to share the results I experienced. Here's the link to the YouTube video. He has another on Tool Grinding that just adds to the mix. Sorry if you all already know all of this, I've been away from it for a while, and just getting back. In the spirit of Ellis's post, have a look, if you haven't, and let's talk...

Doug Trembath


Mike Mahoney on Tools and Grinds

Re: ***Tool Grinds*** *LINK*

#4

Re: ***Tool Grinds***

john lucas

Sorry about that. I really did write a nice thing to go with each tool. I sure can't find it now. I'll go back and scribble something out when I have time.. Hopefully some time this weekend but my parents and sister are up to give me a hand cleaning the other house. I'm getting close to getting it ready to sell.

Re: ***Tool Grinds*** *LINK*

#5

Re: Thin parting tool grind

Galen Vetterick

John

Your thin parting tool has me baffled, but since it has China on the tool I guess the grind came from the sweeping curvature of the traditional roof style of a Chinese pavillian?

Thanks for adding more confusion to my tool grinding!

I hope you can find time to add more info on your posted grinds.

Re: ***Tool Grinds*** *LINK*

#6

Ellis Walentine

Update uploaded *LINK*

Ellis Walentine

Galen, I have just finished uploading the latest version of the Grinds Library, including John's illuminating commentary on his grinds. Check it out.

Ellis


WoodCentral Tool Grinds Library

Re: ***Tool Grinds*** *LINK*

#7

Re: ***Tool Grinds***

GaryG in MD

Thanks Ellis. Very timely for me. Lots of very good info here. It bears a lot of consideration for the little details. ...Gary

Re: ***Tool Grinds*** *LINK*

#8

Re: Thin parting tool grind

john lucas

Galen I make those from Drywall saws that I buy at the Flea Mkt for $1. Grind the teeth off and shape the end and you have a nice stiff blade. I grind it the way I do so the tip is the same height from the tool rest as the tip of my bowl or spindle gouge. This way I don't have to move the tool rest when switching tools.

Re: ***Tool Grinds*** *LINK*

#9

Thanks Ellis

john lucas