Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

Movement: Guitar Pick Up - In Reverse

Posts

Movement: Guitar Pick Up - In Reverse

#1

Movement: Guitar Pick Up - In Reverse

charlie belden

The "pickup" under each string on an electric guitar started out as a small cylindrical magnet with a copper wire coil wrapped around it - an electro magnet. As the conductive iron bearing wire string above it moves through the magnet's magnetic field, it induces/causes a current to flow in the copper wire coil wrapped around that magnet. The resulting current is then amplified electronically and the amplified current is then used to drive another electro magnet - in a speaker - causing a diaprham connected to it - tor move away from the magnet - and pushing some air. The resulting pressure waves in the air can then be heard. And if you were ever at a Blue Cheer performance - you know the resulting sound can also be felt ; )

BUT - WHAT IF . . .

you pulsed a current through the copper wire coil - that's wrapped around a cylindrical iron core? Could it move a horizonal guitar string directly above it and cause it to vibrate - and maybe even make sounds?

OR

you suspended a "ball and socket" pendulum above it? Could you get the pendulum to move if its "shaft" were an iron wire?


Some interesting possibilities to add actual movement to a piece.

comments. suggestions?

Re: Movement: Guitar Pick Up - In Reverse

#2

Re: Movement: Guitar Pick Up - In Reverse

Bill Howatt

I recall hearing about a pendulum that was given a kick every now and then by that method.

Don't think you could drive enough current through the small coil wire to make a detectable sound in the string but if you had a sensitive enough listening device I bet you would hear a sound.

Bill

Re: Movement: Guitar Pick Up - In Reverse

#3

Its called an EBow

Ron Sardo


Re: Movement: Guitar Pick Up - In Reverse

#4

In theory, I don't believe pulses in .....

JamieDonaldson

..a small coil would transfer across an air gap with enough force to move a highly tensioned guitar string. Working strickly as a magnetic field, the coil pulses could possibly generate some movement in a string, but the string would only be "in tune" with the pulses from the coil.

Re: Movement: Guitar Pick Up - In Reverse

#5

Steven Antonucci

I think you have the wrong technology?

steven antonucci

I think that you'd be much better suited reversing polarity in a magnetic field to attract/repel a small magnet than trying to induce some kind of harmonic vibrations?

I don't know anything at all about the guitar pick-ups, so I can't really comment on if it would work. I severely doubt you'd get any sound and I suspect that it might be difficult to control if you did.

Correct me if I am wrong, but you just want the finial to wobble?

Steve

Re: Movement: Guitar Pick Up - In Reverse

#6

Re: Movement:

Mark Mandell - Gone Round In Jersey

Your electromagnet (wrapped core) will exert attractive force when charged, but only in line with the core; it won't (IIRC) spin the object wire as you have drawn. If, however, your "wire" was a magnet and you switched polarity on your e-m with the wire vertically locked in position, you might get the finial to "wag" when the wire was displaced to one side or the other by the induced like polarity on your coils magnetic field.

I think what you're trying to invent is an induction motor, but to do that you'll need a field coil and a magnetic core.

Re: Movement: Guitar Pick Up - In Reverse

#7

Re: Movement: Guitar Pick Up - In Reverse

Bob Macgregor

I wonder if you could modify a solenoid to do what you want?

I'm pretty sure these use a mechanical connection, but at least they (Flip Flap)don't need a battery; they move when there is light:

http://www.greenbaba.com/Solar-Gadget/C012b-Solar-Flower.html?gclid=COeViISFkqcCFQTsKgodX3Ltyg

Or, you could get an old laboratory magnetic stirrer, if you wanted more frenetic movement!

BOB