Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

Walking Canes

Posts

Walking Canes

#1

Walking Canes

Dale Langford

I would like to turn a walking cane for a family member. My question: How do you attach the handle and the foot to the body of the turned walking cane? Any advise would be appreciated. Thanks.

Re: Walking Canes

#2

Richard Allen

Re: Walking Canes

Richard Allen

The foot is generally a press on fit.

You can make the handle in which case you attach the handle in any way that you have designed.

Most handles slide over a tenon on the cane and are glued in.

Re: Walking Canes

#3

Leo Cuellar

Re: Walking Canes *LINK*

Leo Cuellar

Dale, here is some info about determining the correct length. Not affiliated with this company, just found their info page handy. Just what Randy said about technique although there are all kinds of hardware kits available from a great many sources online.

Leo


cane sizing

Re: Walking Canes

#4

Re: Walking Canes

bill Crommett

Dale: When attaching a handle to a staff I prefer to use a rounded straight handle about 7/8 in in diameter. My best procedure is to use some hot melt glue to attach a steady about a foot in length to the shaft and run the shaft through the router table in successive runs to form a saddle for the handle.

I then drill a hole through both the shaft and the handle to fit a sixteen penny nail shortened to suite, and plug the hole with a piece of contrasting wood.