Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A natural, durable finish with minimal coats and fuss popular among woodworkers, flooring professionals, and furniture makers

What's happening here!!??? I just looked....

Posts

What's happening here!!??? I just looked....

#1

What's happening here!!??? I just looked....

JamieDonaldson

..at the thermometer, and the outside air temperature is 5 degrees warmer than the air in my garage/shop/studio!!!! Can it be....spring has sprung???!!! :D

Re: What's happening here!!??? I just looked....

#2

Uh Oh

Mark Mandell - Gone Round In Jersey

Jamie left the studio refrigerator door open again . . :D

Re: What's happening here!!??? I just looked....

#3

Re: What's happening here!!??? I just looked....

David Walser

Jamie,

That must be it because I spent last Saturday planting flowers in our front and back yards. (I wanted to spend my time turning, but someone else suggested that wouldn't be the best use of my time.)

Re: What's happening here!!??? I just looked....

#4

Same here!!!

Doug Trembath

I's a glorious day in February in the Pittsburgh area when you open the big studio door to warm up the shop. I enjoyed it tremendously! No insulated gloves, no coveralls, just a comfortable day...

Like the old Beach Boy's song...

"Wouldn't it be nice..."

Doug Trembath

Re: What's happening here!!??? I just looked....

#5

Dick Hines

Re: Same here!!!

Dick Hines

Insulation will keep cold in as well as out. Open your doors.

Re: What's happening here!!??? I just looked....

#6

Brad Vietje

Re: What's happening here!!??? I just looked....

Brad Vietje

Must be a false spring, Jamie.

Here in Northeastern VT, it was below zero this AM, and up into the 30's during the day. Supposed to be in the 40's tomorrow, and we're expecting rain and 50 degrees on Friday! Then colder and below zero again by Monday and Tuesday... :\

Glimmers of hope -- omens of a spring that's not really here... yet.

Safe spinning,

Brad Vietje

Newbury, VT

Re: What's happening here!!??? I just looked....

#7

Re: What's happening here!!??? I just looked....

Stephen Mushinski

Time to open the big door and take the green Machine for a ride!

Re: What's happening here!!??? I just looked....

#8

Re: Same here!!!

Doug Trembath

I agree, but there has been very little opportunity to do that for the last couple of months around here...

Today will be really nice, and I intend to make the best of it. Thought I might go fishing, but I am doing a demo at my home club Saturday, so I probably should make final preparations, instead... >(

Hope it's as nice for all of you out there, today, as well!

Doug Trembath

Re: What's happening here!!??? I just looked....

#9

Don't Open Your Doors!!!!

Dick Strauss

I repeat...don't open your doors!!!! I did it one year under exactly the same type of early warmup. I ended up with every tool in the garage shop developing a bad case of rust. The tools were still cold and the warm moist air flowing through the shop with the garage door open allowed for condensation to form on the cold tools. I spent the next several cold days cleaning the surfaces with green pads/steel wool and wd40.

Re: What's happening here!!??? I just looked....

#10

Dick- to avoid that grief just open ....

JamieDonaldson

...the doors sooner, before there is such a temp difference in the 2 areas. And don't ask me how I learned that trick!!! :b