Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

You wont beat me

Posts

You wont beat me

#1

You wont beat me 

Terry Scott

This piece of 9.78 kg Piece of Red mallee was exceptionally hard

That hard It took chips out of my bowl gouges

Well partly my fault the way I cut and the way I sharpen as the wall of the chisel flute is very thin and I have the handle way down so the wood is driven down onto the cutting edge.

On the Inside I had to get My Kelton Hollower's out and put my ear muffs on the racket was so bad my wife asked what the H..- I was doing.

The cut I got off the Kelton tip was good enough that all I had to do was use a cabinet scraper which I made in an egg shape from a saw blade.Yes it gets dam hot

I use this on the upward stroke the bowl is turning in its normal direction

Hopefully this bowl will come out ok as I wont to Use it for the Royal Easter show category natural edge

These burls cost 2 arms and a leg but I dont care as every time I turn one Iwonder why I have been so blessed to have me work on one


Re: You wont beat me

#2

Leo Cuellar

Re: You wont beat me

Leo Cuellar

Wow, Terry! some more very fine pieces. Great idea on the cabinet scraper. You won't see me working any burls till I get a lot better.

Re: You wont beat me

#3

Bill Blasic

Re: You wont beat me

Bill Blasic

Terry,

Looks like another fantastic piece! You have made it that we expect nothing but.

Bill

Re: You wont beat me

#4

Re: You wont beat me

GaryG in MD

Terry, You can well imagine how I enjoy seeing the process. Incredible. You and Mother Nature work very well together. ...Gary

Re: You wont beat me

#5

Katherine Kowalski

Re: You wont beat me

Katherine Kowalski

Leo,

Terry's turning the hard Australian burls that cut like ROCKS, (unless they're still green!) Not all burls are so reluctant to be cut!

Best to start with "easy" wood, like Box Elder Burl, (Manitoba Maple), Black Ash Burl, Maple Burl, etc., which are much softer to turn.

Burls are some of the most wonderful woods to work with, especially when they're still wet -- they can deform in all kinds of interesting ways. (I love to turn them thin & finish green, then watch how they move!) Have a go; you'll enjoy it!

Happy to be the "Burl Girl,"

Katherine

Re: You wont beat me

#6

Jim Evans

Re: You wont beat me

Jim Evans

Terry,

What type of finish do you use on Red Mallee? I have a piece but don't want to ruin it with a bad finish.

Re: You wont beat me

#7

Re: You wont beat me finish ?

Terry Scott

I sand with Organ oil late finish which brings out the color then spray with lacquer after Ive let the oil penetrate

Or Danish oil

I sand with the Danish then wipe on wipe off let sit for 24 hours wipe on wipe off keep doing this until one day you go into the shop and this glowing burl jumps out at you

Go to burls on my web site www.timberly.co.nz they are all finished with one of the above methods

Re: You wont beat me

#8

Leo Cuellar

Re: You wont beat me

Leo Cuellar

Hi, Katherine! Actually I have played around with some maple burl a little bit. It had the opposite problem of Terry's, too soft. I ended up with a lot of tear out, which I am sure goes back to technique. Both in handling the gouge & sharpening it. I do really like his scraper though, I'm sure it would be a big help before heading to the sandpaper :D Haven't had great luck with a conventional scraper under those conditions, and haven't had time to fabricate any heavy negative rake scrapers yet. Making new tools is half the fun for me!

Thanks for the tips, box elder looks like a fun wood to work with.

Leo

Re: You wont beat me

#9

Jim Evans

Re: You wont beat me finish ?

Jim Evans

Terry,

Thanks, and I can only hope to come close to your finishes.