Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Grizzly Vicmarc copy

Posts

Grizzly Vicmarc copy

#1

Grizzly Vicmarc copy

John Lucas

I had a friend drop buy yesterday and he's having problems with his Grizzly vicmarc copy. The internal threads are stripping. That's the first time I've heard of this problem with those chucks. I've heard of the jaws breaking on some. Mine is still running great and gets used a lot.

Re: Grizzly Vicmarc copy

#2

Re: Grizzly Vicmarc copy

Bernie Weishapl

I have heard of jaws breaking also but not stripping. I have 4 of them and not a whimper of a problem.

Re: Grizzly Vicmarc copy

#3

Leo Cuellar

Re: Grizzly Vicmarc copy

Leo Cuellar

No problems with my first one, and I bought 2 more early January, with no problems.

Re: Grizzly Vicmarc copy

#4

Re: Grizzly Vicmarc copy

Bill Clark

I bought one about a year ago. It would not run true and the T-Wrench for the jaw screws was so soft it kept rounding over the hex shaft tip after repeated grindings to repair it. I returned it for a refund and bought a Vicmarc.

Re: Grizzly Vicmarc copy

#5

Re: Grizzly Vicmarc copy

Mark Wollschlager

Mine has held up well to light usage over the past couple of years.

The edges of the jaws and sliders were very sharp and I took a diamond file and knocked them down a bit.

Overall, worth the money.

My Talons get a lot more use.

Mark.

Re: Grizzly Vicmarc copy

#6

Re: Grizzly Vicmarc copy

Dave Peebles Lyons, Ohio

Hello John,

I do not have either chuck. But I think you have to expect lower quality with a lower price. The Grizzly may be cheaper for a reason.

I know that many buy based on price. But I think that is a poor choice when spinning a big chunk of wood. :)

I have always believed that quality comes with a little higher price tag. The jaws may fit between the lower priced chuck and the original chuck, but that certainly does not make them equals.

My humble opinion is to save a bit longer and get a chuck with a proven track record.

Best wishes,

Dave

Re: Grizzly Vicmarc copy

#7

Re: Grizzly Vicmarc copy

John Lucas

I have another one on the way. I'm donating it. I will check it out thoroughly when I get it and hopefully get user reports from the new owner.