Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Skew in Action on a box

Posts

Skew in Action on a box

#1

Skew in Action on a box 

Terry Scott

Nothing to be afraid of just spin the work fast and the skew move slowly just rubbing 1/8 of bevel If the black I have marked on the no go zone comes off on the wood

you have the handle to high


Re: Skew in Action on a box

#2

Leo Cuellar

Re: Skew in Action on a box

Leo Cuellar

So basically, like cutting a pummel, only on a larger scale? Not that I'm good at that yet. LOL I have been practicing my invective :D

Re: Skew in Action on a box

#3

Re: Skew in Action Yes leo

Terry Scott

Yes Leo ,I found this crown chisel got a bit short so have brought a new woodcut

Much better as some of the squares I am turning are 600mm square and have to get the chisel in up to the hilt l.o.l

Re: Skew in Action on a box

#4

Leo Cuellar

I'll have to return my large skew

Leo Cuellar

to a normal grind, with the point, with your angles. Was trying to turn something similar, but off center with green wood, but my centers kept walking. Was probably a combination of them being too small and the wood being too wet.

Thanks, Terry!!!

Leo

Re: Skew in Action on a box

#5

Flash Frozen

Bill Neddow

I notice the words "flash frozen wood" in the picture. Do you freeze the wood to get a better cut? I certainly would have no difficulty getting "flash frozen wood" around here these days!

Re: Skew in Action on a box

#6

Re: Flash Frozen

Terry Scott

Good one Bill

The closest we ever get to wood being frozen is if I try and dry it in the freezer

Have to tell you this yarn

Just before Christmas my wife called the freezer repair guy to come out and fit new rubber seals to to the chest freezer . Upon opening the lid he stepped back and said what the hell .My wife was laughing so hard the guy couldn't believe there amongst the frozen met were about 20 large wet turned Bowls .

He went away shaking his head saying in 20 years of doing this job this is the strangest thing I have ever seen.Later that day we received an email saying may he have a picture as his boss wouldn't believe him