Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Latest Box

Posts

Latest Box

#1

Dick Hines

Latest Box

Dick Hines

Here is my latest box. It's black ash burl. The handle I octogan brass rod

I hammered it and then used blacken-it. Then it was buffer lightly to remove some of the blacken-it.

The knob on top of the handle is a brass rod that I turned down to fit a hole drilled through the handle into the blackwood post.

Oil finish not buffer yet.

3 1/2"d X 5 1/2"h

First box in a while. I have been working on hollow forms and bowls. Need to do more of these.

Re: Latest Box

#2

Leo Cuellar

Yes, you do!

Leo Cuellar

Need to do more boxes, Dick. Very fine work indeed. I have one minor suggestion... perhaps on the handle? The straightness of it is slightly incongruous to the sensuous curves of the box. Smacking the ends of the handle good & hard to flare them out just a bit might relieve that. Or maybe, bending it in a slight arc would do the trick.

Hope you don't mind my 2�,

Leo

Re: Latest Box

#3

Re: Latest Box

Doc Green

Good work, Dick, all the way around! ~Doc

Re: Latest Box

#4

Re: Latest Box

woodspinner

Nice box,very pretty wood.

Re: Latest Box

#5

Re: Latest Box

john lopez

Very nice

Re: Latest Box

#6

Exactly what I thought....

Barry Irby

Great looking box, You definitely should do more, but the handle jars a bit. Curve it downward? Angle the ends? Just too straight I think.

Re: Latest Box

#7

Re: Latest Box

barry Ward

Beautifull box,but have to agree about the top,as that straight piece sorta takes away from the piece.

Re: Latest Box

#8

Dick Hines

Re: Latest Box

Dick Hines

The handle beat me up a bit. The bar stated out at 12". I tried to bend it but never could get like I wanted. This piece is about all that was left of the 12" bar.

Next time I am going to work with a piece of copper wire that will be easier to bend. Then move to the brass when I get the copper wire like I want it.