Every new turner needs a Nick Cook, Joe Ruminski, or Bob Rosand. Make lots of quick, relatively easy projects. As they progress thru their turning life they can absorb more and better demonstrations. I remember the 15� airplane propellers at 3000 rpm and the 90 second, from start to finish, box with a popping lid made only with a 1� skew. If you listen, EVERY turner will teach you something. A good mix of Cooks at least once a year and the best your club can afford should grow your membership. Bill Grumbine and Bonnie Klein will show you things that you probably never have seen. Malcolm Tibbetts presents segmenting very well. Richard Raffan is excellewnt. Our CMW meetings often last five hours, but an hour long slide presentation at the beginning is BORING!
I haven't seen very many demos except Lyle Jamiseon (excellent!) and I've spent a wee bit of time with Bill Grumbine (would love to spend a few days...)
A couple of people I would love to see are Richard Raffan (who has been hugely influential to me through his books and vids) and Stu Batty.
For me it was Stuart Mortimer a few years back at the Utah symposium. What struck me most about his demonstration was the ease with which he applied a skew to quickly and easily perform basic turning. After watching him I developed a new ease with my own skews. And he is a very nice guy! Between rotations we penturners were breaking down a lathe setup we had used and he came by and chatted, as friendly as could be. I love his spiral work!
I have to agree with Jimmy Clewes. Jimmy was truly in his teaching mode and offered so much, plus he encouraged me to keep trying. My first end grain vase was a disaster that flew off of the lathe.
I finally felt comfortable with the gouge and ended up with this 4" high 1.5 ounce item.
I attended two Molly Winton demo's at the Portland AAW Symposium and a light went off for me. I also credit Andi Wolfe and Mathew Hill for a lot of ideas and inspiration. These three got me working on surface enhancement and now I'm off and running with ideas to try.
I would say it's easy, but I have been fortunate enough to see so many. Demoed in the same room as Ray Key and saw him do fantastic demos with ease, did a walk on as a camera man at the AAW symposium in San Antonio for John Jordan so I got to see up close and personal, but in that symposium, we went and watched David Ellsworth with my son (about 9 at the time) and afterwards went to listen to the chatter and he stopped talking to everyone, put his hand out to introduce himself to my son and from then on I was in awe. I took a class from him at his house and have since gone on to do mostly hollowturning.
Stuart Batty is awesome, Clay Foster inspiring with his ethereal connection to the art and his work, Michael Hosoluk for his ease of tool use, turning and ability to teach it to you right there, and so many other names I can't even think of.
Ya, I saw that. Very tempting but I need to go to Guelph over the Victoria Day weekend as the old man from Japan is coming back this year. Namitome Sensei is not to be missed.
Back to turning... I also cannot help but think that my time/money would be best spent taking a few days with Bill G. or someone of his ilk. You know, small class, lots of attention, tailored to my needs. Hmmm, fall in Pennsylvania. Can think of worse places to be...