Chatter with a skew is easy
steven antonucci
I thought I made a chatter tool once, but I couldn't find it when I looked for it last week. Instead, I grabbed a 1/4" skew. It might be 1/8" thick? If you set your tool rest a little above center, and present the skew flat across the face like a scraper, it will chatter.
You can vary the angle from flat to about 45 degrees, apply more or less pressure, change the overhang, etc to get different patterns. Here are some tops I made last week for a charity that we fundraise for: 
The two on the left are chattered using the skew... Looks great, but makes them wobble when you spin them (which makes me nuts!)
Steve