Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Good Hope Hardwoods - Walnut Slabs & Specialty Hardwood Lumber

Could I Beale Buff a headlight? OT

Posts

Could I Beale Buff a headlight? OT

#1

Could I Beale Buff a headlight?   OT

Barry Irby

The headlights on my Mazda Pickup are cloudy or sort of frosted looking. I know there are products you can buy to buff them with, but I wonder if I could Beale Buff them? Any Thoughts?

Re: Could I Beale Buff a headlight? OT

#2

Re: Could I Beale Buff a headlight?   OT

Mike Brazeau

One of our guild members has done his face shield and said it did a fantastic job. He did the normal tripoli, diamond paste etc.

Re: Could I Beale Buff a headlight? OT

#3

Mike Stafford

Re: Could I Beale Buff a headlight?   OT *LINK*

Mike Stafford

I am sure it can be done if you have the right compounds and wheels.

I buffed some plastic a while back and used a string buff that I got from Caswell Plating which is one of the most comprehensive warehouses for buffing compounds, wheels and machinery.

Here is the link:


Buffing wheel for plastics

Re: Could I Beale Buff a headlight? OT

#4

Jim in Burlington Ont.

Re: Could I Beale Buff a headlight?   OT

Jim in River Oaks, Ont.

Ditto on Caswell, I use their compounds on my pens,

take care,

Jim

Re: Could I Beale Buff a headlight? OT

#5

I did a Saturday demo in a neighbor's.....

JamieDonaldson

..driveway last summer about how to hand buff fogged plastic lenses. We worked on 4 cars that day, using rubbing and buffing compounds and NuFinish car polish to top it off. With the cost of replacement housings these days it's definitely worth an attempt at polishing!

Re: Could I Beale Buff a headlight? OT

#6

Re: Could I Beale Buff a headlight?   OT

Matt Birchfield

That's one of the things my company does... just wet sand with progressively finer grits up to 1000, maybe 2000... it's way faster than buffing. Use a random orbit sander if you have one. The problem is that you remove the UV coating. I replace it with automotive clear coat. If you don't re-coat the lens you'll need to repeat the process again relatively quickly. Even without the UV protection you'll see better at night.

Re: Could I Beale Buff a headlight? OT

#7

Re: I did a Saturday demo in a neighbor's.....

Jim Sebring

Take a look at Don Pencil's PL buffing stuff. It's designed for plastic and lacquer (PL). www.donpencil.com .

Re: Could I Beale Buff a headlight? OT

#8

Re: Could I Beale Buff a headlight?   OT

Mark

I found a kit, from one of the big red box stores that is made for polishing headlights. It's made to be left on the car and polished right there. Don't know how it works yet as I am in Wisconsin and in the middle of six months of Death's icy grip. I think it's made by a rather large company.

Hope this helps

Mark

Re: Could I Beale Buff a headlight? OT

#9

Try

D. Hansen

Micro-Mesh they make a kit to do just that.

Re: Could I Beale Buff a headlight? OT

#10

Re: Try

Peter Lamb

Mother,s sells a kit 'Powerball 4lights" which includes a spherical cotton buffer for use in an electric drill, liquid buffing compound and four grits on two pads for sanding. It is designed for use with the lens on the vehicle.

A bit pricey but works well

Re: Could I Beale Buff a headlight? OT

#11

Faceshield

Bill Howatt

It is necessary to have a light touch and not overdo it. If you buff too long in one place you can remove more plastic and create a lens resulting in distortion.

Bill

Re: Could I Beale Buff a headlight? OT

#12

Harbor Freight has a $10 kit

Al in NJ

http://www.harborfreight.com/12-minute-headlamp-lens-restorer-kit-65938.html

Re: Could I Beale Buff a headlight? OT

#13

Re: Could I Beale Buff a headlight?   OT

john lucas

BArry I just bought Headlight restorer from Auto Zone. It was quite simple and took me about 15 minutes per headlight.

Re: Could I Beale Buff a headlight? OT

#14

Re: Could I Beale Buff a headlight?   OT

Jim Rutten

I would think it would be tough to pick up the truck let alone turn it under the buffing wheel. :D

Re: Could I Beale Buff a headlight? OT

#15

Or carry the lathe spindle mounted.....

JamieDonaldson

...buffing wheel out to the truck? :D