I use a 1/2" curved edge skew and a 1/4" bench chisel as well as a 1/16" shop make parting tool for all sorts of turning - and probably not like they're supposed to be used. But I get them to do what I want them to do - most of the time.
So - for those who have avoided using a skew and bedan, or don't want to plonk down a chunk of change for a
REAL bedan - a quarter inch bench chisel may act as a gateway experience to the bedan and skew. I did a quick video of a few of the ways I used an inexpensive regular old bench chisel - that would be difficult to describe with just words - or even some still photos.
Have a look and see if the vid gives you enough of the idea of how to use a bedan.bench chisel to make some common cuts usually done with a spindle gouge. And if you have questions feel free to ask away.
Who needs a Bedan tool when a Belden tool is just as good? I use a small regular chisel often and I wondered if I was the only person who did so. Interesting, thanks.
Thank you for demonstrating the technique, Charlie. I was looking at one of my 1/4" sash chisels the other day and wondering if I should try it. I've got 5 different skews I've been practicing with the past few days and it is starting to pay off now. I still get a catch now & then but its not a big deal any more. Trying to get a clean surface on that hemlock is improving my sharpening skill as well.
Good suggestion, Charlie. Enco sells 5/16" square high speed steel tool bits in 6" or 8" lengths that you can grind to the appropriate shape. An 8" is $6.91, hard to beat. (Link below). They also have 8" lengths in 1/4", 3/8", and 1/2" but 5/16 is my favorite all-around.
I've made several of these, in various sizes, over the years and use them almost daily. I grind them to right around 45� angle with the edge in the center, which I find to be about right for cutting well but not too aggressive. Sorby and Taylor make square parting tools but they're 'way more than $7.