Cold hands and feet
Mike Foster
I just got in from the shop, roughing out a new piece. I had a bit of a log that was left by tree trimmers that work for the power company. I originally thought this was ash from the bark. Turns out it is red maple. It has been cold here in VT for quite some time. Varying degrees below freezing, but usually not warmer than that. The log was frozen when the tree was felled, and has remained in my barn under the shop where there is no heat. Frozen solid. Had to give it a go just to see how it turns. I would say that it turns just about as sweetly as if it was freshly felled and not frozen. My shop is heated, but turning that frozen wood got my gouge, hands and feet (from the piles of shavings on the floor) pretty cold. I don't use gloves when turning (I know there a is wide variety of opinion on that) and I noticed that the wood coming off the gouge was a bit harder on my hands than normal, more like little chunks of ice hitting them. I got nice streamers of wood flying off the piece, but the shavings seemed to shatter, so the wood was more like coarse sawdust than long shavings. That was interesting. Nice part is that you and the the shop don't get soaked.





