Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Build it. Rock it. Rockler has your woodworking tools.

***SURVEY: THE IDES OF JANUARY (+5)***

Posts

***SURVEY: THE IDES OF JANUARY (+5)***

#1

Ellis Walentine

***SURVEY: THE IDES OF JANUARY (+5)***

Ellis Walentine

Yes, folks, it's time yet again to trot out another in our ongoing series of thought-provoking, bi-monthly woodworking surveys. This new question was suggested by Barb Siddiqui and is inspired by a single word in Charlie Belden's recent "Hypothesis Challenge" on the Turning board: Intimidation. We all have an intimidation threshold --- maybe more than one --- in our woodworking endeavors: the point at which conscience or fear or hard-won experience kicks in and says, "Wait! This is too dangerous," or "I can't do that." This month, I'd like to hear about the things that scare or intimidate you -- lines you've drawn for whatever reason, how these limits have shaped or limited your woodworking style or accomplishments, and what, if anything, you've done to manage and/or surmount them.

As always, your answers will be excerpted, collated, sliced, diced and served up in our "News & Views" column in the next issue of Woodworker West magazine, which, incidentally, has just launched a digital version.

Thanks as always for participating!

Ellis Walentine, Host

PS Here's the latest on Woodworker West's new digital edition...


To celebrate Woodworker West's 24th year, it has posted a digital edition of its January-February issue at: www.sopdigitaledition.com/woodworkerwest , including Ellis Walentine's "News & Views from WoodCentral.com" column.

Also in this issue, there is a preview of the exhibit "Family Tree: 65 years of Woodworking in Northern California," which is opening this weekend, as well as pictorials from the Hawaii Wood Show, Veneer-Tech's Craftsman's Challenge, and the Western Design Conference, plus two special employment opportunities in the Marketplace section. Subscription discounts are available at: http://www.woodwest.com/subdiscount.html

Check it out. I think you'll like our new digital magazine!

... Ron Goldman, Publisher


Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#2

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

Dick Wilson

For some reason the links don't work. Could not find.

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#3

Unisaw

Carole Valentine

Have never felt comfortable using that thing and avoid it if at all possible. Will use a band saw, a jig saw or a circular saw...sometimes even a hand saw if I can avoid the table saw, though I am not by any means careless with any of those tools either. There are times that only the TS will do the job and when that is the case, it takes me forever to do it because I go over and over in my mind that particular cut to be sure I am not overlooking something that could turn nasty. Have all kinds of guards, splitters, push blocks, jigs and other safety equipment, but the thing still makes me nervous.

The other piece of equipment that really keeps me on my toes is my grinder. Have seen what can happen with a moment's inattention with those things.

My general motto with all power tools (and any cutting hand tools) is that they are bigger and more powerful than I (even if they are small in physical size), they cut flesh and bone easier than wood, and ALL of them deserve a very healthy respect.

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#4

Dick Hines

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

Dick Hines

In my 66 years I have been around tool the whole time.. My father had a wood shop and he reinforsed respect for tools, power and hand.

In my life I have been into fast cars, boats, motorcycles and women, don't let my wife see this. Not much scares me. EXCEPT walking up on a big old snake, I don't care what color it is. Now that will make me do some serious thinking.

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#5

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

Emmett Manley, Lakeland, TN

I am intimidated by any turning project that requires steps involving the use of a bandsaw. I will use the bandsaw to prepare blanks, but I am very hesitant to return to the bandsaw with a half completed item which needs further shaping with the saw. The item is now smaller and the cut more demanding. However, since I have invested time in this item, I feel compelled to make the cut, even if I have to get my fingers much closer to the blade than when doing sawmill work. Push sticks don't work well when trying to make a delicate curve.

I just don't want to be placed in a situation where I risk my fingers to complete a $5 coffee scoop.

As one famous Amoorican is fond of stating, Respect The Bandsaw

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#6

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

Barbara Gill

I am with Carole about my Rockwell Delta Unisaw. it is a 5 HP 3 phase beast. I don't have to use it since I now turn. If I need to rip something that is too big for my bandsaw I use my sawmill. My last experience with my Unisaw made me re-evaluate whether or not I should use it. Now it is an amusing story.

The only other thing that scares me in the shop would be those Brown Wolf spiders. Oh yeah there was that groundhog that came busting ### through the door...another funny story.

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#7

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

Terry Quiram

Router mounted in a table. The bigger the bit the larger the pucker factor. I have never been hurt with a router but I am super careful to the point of being anal. At the slightest feeling of being distracted I shut it off and walk away.

The second most scary tool is my 16" jointer with 5hp motor. That baby doesn't slow down for anything. You could loose your fingers right up to your elbow in an instant. I always, ALWAYS use push blocks.

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#8

Steve Kubien

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

Steve Kubien

Tablesaw. I don't like them at all. Thankfully, I now turn wood so I have little reason to ever use it. Actually, hatred of the TS will help keep my away from segmented turning (there are other things too but...).

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#9

Steven Antonucci

Routers and shapers scare the $#% out of me

steven antonucci

Not much at a lathe that I worry about. Once I leave the lathe, the router gets my vote. I would never go near a shaper with a big panel bit.

S

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#10

Respect the bandsaw!

Ed Moore in SW VA

Actually, the tablesaw is more intimidating to me.

Check the Winter 2011 issue of Woodturning Design, page 56, and find the two pictures of accidents about to happen on a tablesaw. I alerted the editor and author of these improper cuts, but there was no warning nor disclaimer in the next issue.

Ed

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#11

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

charlie belden

If Intimidation means Be Vewwy Vewwy Cayoful Wabbit, then any power tool with a motor and something

spinning with teeth or coarse abrassive on it - be it a 10 regular kerf saw blade in a cabinet saw, a

12" set of joiner knives spinning at "only" 5000 rpms, a 12" diameter disk sander, a bandsaw blade of any

size from 1/8" to 1 1/2", a 12" SCMS or even a spinning router bit in a router table - all are approached with caution and a mental check list

1. control the material before, during and after the operation so it can only go where it's supposed

to go - nowhere else

2. keep all body parts, clothing etc. the hell away from anything that's moving or can move

3. stay out of the Exit Path so as not to be in the path of anything that's moving in a direction

it's not supposed to go

4. pay attention. If my jaw is clenched, my shoulders tight or I'm holding my breath - whatever

causes that reaction is a Red Flag that means "STOP. Figure out why. If there's a solution,

do it. If not - find another way that doesn't cause those reactions.

5. do not attempt to operate hand or power tools - while still bleeding (see photo below)

In turning, it's the bowl gouge that cause the clenched jaw and white knuckle grip - because I don't

really understand how it should be used. Ironically, the skew and bedan are like old familiar friends.

Other than a splinter now and then, my only unpleasant experience was with a 3/4" beefy mortising

chisel. When a mortising chisel gets stuck in a mortise, I learned that having your face in the place

it will go when you finally pull it out of the mortise - is not a good idea. I also learned that when

the butt end of a mortising chisel strikes either your chin or between your eyes - you can literally

see stars


Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#12

Keith Tompkins

Re: Routers and shapers scare the $#% out of me

keith tompkins

Steve, I had a big three-wing shaper cutter explode while I was using it. 1.25" spindle size, the cutter was about eight pounds. Pieces went through the block wall ahead of me, cracking it top to bottom. It then proceded to go through the exterior wall as well. If it went my direction, it would have cut me in half. But, what I'm really afraid of is heights!

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#13

Betty Scarpino

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

Betty Scarpino

Chainsaws. I used to use one, taught by a proficient sawyer, but these days I rely on someone else to chainsaw my wood ... like Jennifer .... nice that she lives only three miles away. And she's younger than me.

A friend of my brother-in-law killed himself with a chainsaw, a huge competition saw that kicked back and tore him apart. He was a logger, used a chainsaw every day at work. Emergency room doctors said they could not have saved him even if the accident had happened in the emergency room.

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#14

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

robo hippy

What scares me???

Power tools, well, no. A few minor things, but pay attention always.

Snakes? no, have been picking them up and playing with them since I was 4 or 5. same with bugs.

Heights? no, I flew a hang glider for 10 years. Though a couple of my flying buddies couldn't be up on ladders.

Watching my daughter grow up (she is almost 15), now, that is kind of scary. Learning to drive. Learning to handle boy friends. Yea, scares me, but so far, so good.

robo hippy

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#15

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

Malcolm Tibbetts

If �fear� of power tools equals �respect� then that�s a good thing. Many years ago, I nicked the end of my thumb on a table saw (just enough to require a band aid). That was the cheapest, most effective safety lesson I ever received. I do my best to avoid it, but the silent killer in my shop that I fear the most is dust.

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#16

George Taylor

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

George Taylor

Being a part time turner, my biggest intimidation is "getting started." After working 10-12 stressful hours each weekday (including the commute), I found I just don't have the enthusiasm to get into the shop. And by the weekend, the chores take priority. Winter and the shortened daylight doesn't help as well.

Quality of life in the American Enterprise has degraded over the last decade and I can foresee a potential health crisis for this country/world. I hope to make 3 more years on this grind and then I am out. If not for some very personal reasons, I would be doing it now.

Sorry for the rant, I needed to vent to some kindred spirits.

George

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#17

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

Don Orr

This might sound strange but I'm not really intimidated by much in woodworking.I'll try most anything after reading about it or seeing it done. I DO however have a tremendous respect for all machines and sharp tools. What I probaly have the most trouble with is starting new projects. There are so many things I want to try that I don't know where to start. I'll never have enough time to do it all so I sometimes get hung up and end up doing nothing. I usually end up at the lathe where I am the most comfortable.

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#18

Steven Antonucci

Needles make me queasy

steven antonucci

you, me, on tv, just the thought of them...

getting rushed to the hospital after a shaper accident and having to have an IV inserted is my personal vision of hell...

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#19

Caliper (divider)

Doc Green

Not a dial caliper nor a digital caliper--one that looks like a circle-drawing compass with two sharp, pointed legs and no pencil . . .

It's accepted practice to establish a diameter on a sidegrain turning (plate, platter, etc.) by lightly touching one or both legs of the caliper to the spinning workpiece and moving the caliper from side to side until both legs track on the same circular path. When both legs track, increase the pressure to make a visible scratch that marks the desired diameter.

I do not do this. In my opinion, it is a very dangerous procedure because of the possibility that one leg might catch on the piece, sending the caliper flying.

Yes, I've done it without incident, but not any more. ~Doc

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#20

Don, I have a suggestion ...

Ed Moore in SW VA

for those times when you just can't seem to get started. I have done this many times and it helps. Before you hit the shop, take a pad of paper and make up a list. The first item is always as shown:

1. make up a list

2. clean area around the 1018 (or Robust)

3. sharpen spindle gouges and roughing gouge, or bowl gouges

4. simple project that I need to do

5. something I want to do

6. something I need to do, but don't want to do

7. whatever

When you have your list complete, check off number 1. Let your list become the item that you are working on. If you do something not on the list, add it to the list and check it off. As you check more things off you will feel efficient and be able to accomplish more than you expected to do.

I rarely do things in the order of my list, but I usually accomplish something.

This is a simple device, but it works.

Ed

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#21

Re: Caliper (divider)

Carole Valentine

Doc, I NEVER touch both legs of the caliper to the wood...only the left leg and then very lightly with the tool rest as close to the wood as possible.

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#22

Noise and Dust

Jorge Casta�eda

I have a healthy respect for all tools, I have a number of scars from hand tool and swear by OSHA certified prescription shop glasses after a table saw threw me a knot smack in my right eye, fortunately the glasses took care of it and did not get even scratched.

In my shipyard days, I was around monster power tools, 20" joiner, 30" planer, circular saw mill etc, etc, at the time I was more scared from fear the sticks we were working with fell on me, big long green red oak, equally big and heavy long leaf yellow pine.

Somehow I walked away from it after 13 years with all my fingers, I was the only one of the carpenter's crew digiting on deca mode.

Now, looking back, I wish hearing protection was a law, same with respirators, saw dust in my respiratory system is not, and never was welcome. I am deaf.

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#23

Leo Cuellar

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

Leo Cuellar

The only thing that causes me some trepidation is the skew chisel. I do however try to practice with it whenever I can. It is my tool of choice for taking a spindle to round. Where it continues to give me aggravation is at the high point transition between features, the tops of beads, shoulders etc. I have tried the traditional grind the swept back point and the Drozda grind. If I can't nail this down, I'll move on to the bedan and see if this works for me.

Oh, yellow grinders with poorly designed switches next to the business end really scare me.

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#24

Steven Antonucci

Covey and the Seven Habits of Highly Effective

steven antonucci

...people...

One of the covenants is that we have all of the time in the world to do whatever we want to do...but we prioritize things into or out of that time. I have a list of things that "have to get done"... but don't because I really don't want to do them.

Even when I make a list, I tend to work on things I want to. The reason they made the list in the first place is that I didn't really want to do them the first pass!

Some days, I just cut wood knowing that just cutting wood is all I am going to do...and that's OK by me!

S

Re: ***SURVEY: THE IDES OF JANUARY (+5)***

#25

Mike Peace

Re: Caliper (divider)

Mike Peace

I am fearful of using calipers on spinning wood too! I have never tried it.