Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Tea pot progress

Posts

Tea pot progress

#1

Tea pot progress 

Terry Scott

Progress finally

Reversed chucked to create the ring for feet and checking that the curve flows through .This saves heaps of time

Feet done and marked out ready for carving

I will also sand the wings down thinner after carving the body

If I turn them thinner than this the tips jump out and grab me and I may have a break

This is when my messy workshop pays for itself if I drop the piece at least the shavings will save it

Re: Tea pot progress

#2

Re: Tea pot progress

charlie belden

Terry:

I really appreciate you showing photos of a piece in progress. We mainly get to see the finished piece but seldom see a piece in progress or get much information on how the piece was done or how much time and effort went into it.

I think this is the first example I've seen that utilized a template done BEFORE the turning got going. Do you draw up the profiles for some of your pieces at full scale first? With winged pieces, that could be very valuable.

Re: Tea pot progress

#3

Re: Tea pot progress

Terry Scott

Hi Charlie

No I dont draw anything as I cannot even draw a straight line

I disagree with you that drawing a picture first may help ,Id be totally disappointed as no way these would come out like the picture (grin) But I can see the finished item in my head scary ah

I am using the contour gauge to check that the curve flows through the ring

Re: Tea pot progress

#4

Ellis Walentine

Great tip, thanks!

Ellis Walentine

I've always eyeballed those interrupted curves for continuity. The contour gauge looks a lot more reliable.

Ellis

Re: Tea pot progress

#5

cool, Terry...

GaryG in MD

Very nice to see -- thanks. ...Gary