Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

Ungluing epoxy

Posts

Ungluing epoxy

#1

Ungluing epoxy

Mike Foster

After posting my recent piece "Open Wide" here and on WOW I got some good feedback and decided to try using some brushed stainless steel for mounting the piece in lieu of the brass. It seems that I remember someone mentioning that removing tools steels from handles, just heat the steel and it will eventually break the glue joint. I did a google search (not really comprehensive) and did find that this is the recommended procedure for breaking a cyanoacralate bone, but no info on an epoxy bond. I used epoxy to glue the brass into the soapstone. Will heating the brass with a microtorch break the epoxy bond?

Mike

Re: Ungluing epoxy

#3

Re: Ungluing epoxy

john lucas

Heat will definitely break the bond. I used to install threaded inserts into bows for inserting various attachments. I would put a 1/4x20 bolt in the insert and heat the bolt and the inserts came right out when they needed to be replaced. It doesn't take much heat.

I've also pulled quite a few epoxied tools out of handles.

Re: Ungluing epoxy

#4

JL

Re: Ungluing epoxy

JL

If you are leery about heating, try some dry ice. I've used it to make epoxy brittle before. Brass and stainless steel conduct "coolness" as well as heat.

Re: Ungluing epoxy

#5

Re: Ungluing epoxy

Dick Coers

I might be more concerned about the spot heat on the soapstone. My only experience is spot heat on concrete, and that will spall off some pretty big chunks. I know soapstone is a way different animal than concrete, and they do use it on wood stoves, but those weak veins in soapstone always scare me.

Re: Ungluing epoxy

#6

Thanks guys

Mike Foster

I'm going out to the shop to give a try. I'll let you know if it works.

Re: Ungluing epoxy

#7

It worked

Mike Foster

I was surprised how long it took though. I probably overkilled when drilling the stone for the brass. The hole was probably 1/2" deep for a 1/8" brass rod. I think the soapstone may have been acting as a heat sink, as it took a long time to get hot enough to break the bond. The brass never changed color (red..)