Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Veritas - Innovation in Tools

OT: Is anyone out there-------

Posts

OT: Is anyone out there-------

#1

OT:  Is anyone out there-------

bill Crommett

----------------Involved in old sailing ship models ?

Re: OT: Is anyone out there-------

#3

Dick Hines

Re: Nope, but I have seen some incredible ones.

Dick Hines

How are you talking about? I used to build model ships.

Re: OT: Is anyone out there-------

#4

Sailing ship.

bill Crommett

I have a three masted sailing ship model that was built back in the thirties by a Norwegian retiree who was supposed to have come to America on a similar one as a little boy. It has been in the family for over seventy years. Because it has been moved many times and has been admired by many small children with unsteady fingers there has been some rigging damage which I have been intending to correct and restring. But as age will sometimes do, my dexterity has deteriorated to the point where it won't handle the job. The model is 29 inches long and the mizzen mast is 26 inches tall (from the bilge). I don't want to subject it to a garage sale, and am therefore trying to find someone who would take the time to re-hab it with some loving hands.

I have some pictures of the ship as it sits in the crate that has been it's home for the past 22 years.

Re: OT: Is anyone out there-------

#6

Dick Hines

Re: OT:  Is anyone out there-------

Dick Hines

Ship modelers look a lot like woodturners. Long of tooth with gray or not much hair.

It takes months and months to build a good ship model. We are lucky in that we can have a good bowl in a few hours.

Re: OT: Is anyone out there-------

#7

Re: OT:  Is anyone out there-------

bill Crommett

John: Send me your e-mail address and I will send you a couple of pictures you can forward to the modelers club for consideration.

Re: OT: Is anyone out there-------

#8

Re: OT:  Is anyone out there-------

john lopez

I will do that.

J.