Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Super Resolution Thermal Imaging Camera

This might be handy to recenter bowls or spindles *LINK*

Posts

This might be handy to recenter bowls or spindles *LINK*

#1

This might be handy to recenter bowls or spindles *LINK*

John Lucas

I know you've had it happen. Gotten a catch and knocked a bowl out of wack or turning a small spindle in a chuck and had it get off center. I think we can make a tool like this and feed it in by hand and possible get it back centered. Worth a try. I'll try to build one in the near future and see how well it works.


http://www.youtube.com/watch?v=tn7A9PqNftY&NR=1&feature=fvwp

Re: This might be handy to recenter bowls or spindles *LINK*

#2

Steve Kubien

Re: This might be handy to recenter bowls or spind

Steve Kubien

slick

Re: This might be handy to recenter bowls or spindles *LINK*

#3

Re: This might be handy to recenter bowls or spind

Randy Gleckler

Very interesting... would think a skate wheel might work to with the softer wheel... but cool idea.. THanks

Re: This might be handy to recenter bowls or spindles *LINK*

#4

Leo Cuellar

Re: This might be handy to recenter bowls or spind

Leo Cuellar

Thanks, John. I've been wanting to get a tool post to mount on my lathe for knurling etc. That is just one more good reason to have one.

Re: This might be handy to recenter bowls or spindles *LINK*

#5

Re: This might be handy to recenter bowls or spind

John Lucas

Ditto Leo. After seeing Eli Avisara's rig I've been wanting to rig up my cross feed table to the lathe with accessories for turning spheres, ornamental type work and now this. It's just one more reason I need to retire to get enough time to do these things.

Re: This might be handy to recenter bowls or spindles *LINK*

#6

JL

Thanks for sharing.

JL

Re: This might be handy to recenter bowls or spindles *LINK*

#7

Re: This might be handy to recenter bowls or spind

Norm Smith

John, Seriously there is a growing market for this stuff in woodturning. With your knowledge and ability you could produce and sell lots of good stuff. Think about it.

Norm

Re: This might be handy to recenter bowls or spindles *LINK*

#8

Dick Hines

Re: This might be handy to recenter bowls or spind

Dick Hines

It would work for spindles but maybe not so good for bowls. They don't even keep their shape after sanding.

Re: This might be handy to recenter bowls or spindles *LINK*

#9

Re: This might be handy to recenter bowls or spind

John Lucas

Dick I think it would work if used right after you knock on off center. Of course if you wait 5 minutes it will warp and then good luck.

Re: This might be handy to recenter bowls or spindles *LINK*

#10

Dick Hines

Re: This might be handy to recenter bowls or spind

Dick Hines

When are you going to build one and try?

Re: This might be handy to recenter bowls or spindles *LINK*

#11

Re: This might be handy to recenter bowls or spind

john lucas

As soon as I can get the other house in order. I already have a bearing as well as some soft edge bearings from a sliding door. Can't wait to try it and see. I've knocked my share of small finials out of true and can usually get them back in with some trial and error. This looks very fast and we don't need +/- .002"

Re: This might be handy to recenter bowls or spindles *LINK*

#12

Re: This might be handy to recenter bowls or spind

Wayne Leach - NW Ontario

John,

Great idea-I will add that to my to-do-list for my new metal lathe and also for the wood lathe.

Thanks for the enlightenment

Wayne