Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

Serendipity

Posts

Serendipity

#1

Serendipity

charlie belden

Here's another example of serendipity.

I'd turned two pieces out of claro walnut - an amphora lidded box with blackwood pull and what started out to be a first go at turning winged cup. Normally winged pieces are turned on a single axis - the centerline of the cup or bowl. In keeping with my inability to stick with KISS (Keep It Simple Stupid), I turned the wings on two offset axis along the length of the blank so they'd be two intersecting arcs - that tapered towards the cup. Left the wings fat so I could do some carving on them later.

I took the amphora and the carved winged cup to our turning club meeting for Show & Tell. Knowing I like to add actual movement to my stuff, a club member asked if the winged cup would spin. I said I'd work on it.

When I got home I put the amphora and winged cup on the table - and the amphora's lid came off. So I set it on the table, "pull" up, next to the winged cup. A Light Bulb effect happened. Put the cup on top of the pull of the amphora lid and see if it'd balance. The top of the amphora lid's "pull", beng slightly convex on top, made the balancing act easy.

Hmmmmm. Wonder if it'd stay on - if I spun it. It did. And I could get it to spin - by blowing on it.



Please ignore the details of the carved winged cup - it's still a work in progress. Focus instead on the inherent balanceability of winged cups/bowls and the use of it to add movement to a piece.

If it has wings - shouldn't it fly - or at least spin?

Think of the tension a winged cup - apparently balanced precariously on top of a tall thin pedestal might have.

Wadda ya think?

Re: Serendipity

#2

Re: Serendipity

Bob Macgregor

Before you know it, Hagar the Horrible will be wanting you to make him some custom hats.

BOB

Re: Serendipity

#3

Leo Cuellar

Re: Serendipity... indeed.

Leo Cuellar

Seeing as how you're in Cali... I bet there would be a market for fancy turned scales, which this brings to mind.

Re: Serendipity

#4

Viking Helmets! With Horns!

charlie belden

Everybody is doing cowboy hats. Don't recall ever seeing a turned Viking Helmet - with horns. Trojan helmets have been done - but - no Viking helmets - with horns. Hmmmmmm . . .

Re: Serendipity

#5

Re: Serendipity... indeed.

charlie belden

Honest officer - that's wood art - NOT a drug scale. No, really, it's a dynamic sculpture. See, the artist signed it - right here. I can show you the piece on his website. The guy does all kinds of Wild Hare Ideas. There are even YouTube videos of some of his kinetic turnings.

Would it be possible to loosen these handcuffs just a little - I can't feel my fingers?

(Turned balance scales. Hmmmmmm . . .)

Re: Serendipity

#6

I built one- I'll post it tonight-real men

John Lucas

don't do cowboy hats.

Re: Serendipity

#7

Leo Cuellar

Society for Creative Anachronism...

Leo Cuellar

could be another potential market. Think of all the witches, wizards, warlocks, apothecaries, herbalists, scientists, gentleman scholars, etc. who require proper accoutrements to ply their trades. Actually that would possibly open the door for a lot of other stuff that used to be turned. Say perhaps, telescopes?

Re: Serendipity

#8

Fertility Experiment #29

john lucas

Too much wine was involved in the design of this piece. There are 2 more in the works. Fertility Experiment pieces that is. This is about 2 feet long. Everything is wood. The helmut was hammer textured and the horns are airbrushed.

Re: Serendipity

#9

Re: Serendipity... indeed.

john lopez

Funny stuff Charley,

now get in the back of the patrol car !

Re: Serendipity

#10

Hey Charlie, where's your...

JamieDonaldson

.."trunk monkey" when you need him? I miss those videos!

Re: Serendipity

#11

Leo Cuellar

Well done & hilarious!!!!   

Leo Cuellar

Re: Serendipity

#12

Re: Fertility Experiment #29

charlie belden

So when do you work on getting the oars to move. Better yet -a flagella powered viking long boat.

And folks think I do Wild Hare pieces. It's comforting to know We Are Not Alone ; )

Re: Serendipity

#13

Re: Hey Charlie, where's your...

charlie belden

"trunk monkey"? Please explain.

Re: Serendipity

#14

Re: Hey Charlie, where's your...

bill Crommett

Jamie: You forget that Charlie is too busy with important stuff to watch TV commercials.

Re: Serendipity

#15

Re: Hey Charlie, where's your... *LINK*

Stuart Johnson

I had never heard the term before but check this out:


Trunk Monkey

Re: Serendipity

#16

I Wanna TRUNK MONKEY!

charlie belden

Re: Serendipity

#17

I thought you would like the concept!!

JamieDonaldson

:D

Re: Serendipity

#18

Except . . .

Frederick Nelson

That was an Ape, not a monkey. I'm told apes are rather particular about that!

Fred

Snowy and gray in Eastern Missouri

Re: Serendipity

#19

Re: Except . . .

charlie belden

Literary License - Trunk Monkey sounds better than Trunk Ape - it's a Syllables Thing. Using the correct name Ape conjures up visions of King Kong. The ad agency that came up with this one was going for CUTE - followed by surprise - when the "monkey" beats the crap out of a bully - with a tire iron. Surprise is a key tool of comedians and other humorists - which is why I try and incorporate it into some of my pieces.

Regardless of the species - I WANT ONE!