Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Wire Burning Results

Posts

Wire Burning Results

#1

Wire Burning Results

Dick Wilson

Recently I posted a question asking what you use to wire burn. Again, thank you for your response. I decided to use picture hanging wire because it fit in between the beads better. It worked great.

I, like many, read with great interest the article in the December issue of the Journal on suspend forms by Neil Scobie. I have been a fan of all the turners who had pics in the article. This is my first of three meager attempts.

Beach and Walnut. 11" x 7" No, I am not Alan Lacer Jr. I didn't use a skew. I used a beading tool. Wire burning between beads. Turned beads for spacers. Instead of making the legs per the article, I laminated maple veneer with the grain running 90 degrees to the walnut grain. Spray lacquer and carnuba wax buffed.

Comments and critique welcome as always.

Trilogy of Inspiration - #1


Re: Wire Burning Results

#2

Leo Cuellar

Nicely done! 

Leo Cuellar

Re: Wire Burning Results

#3

Steve Kubien

Re: Wire Burning Results

Steve Kubien

Geez, that's nice. Excellent finish too. I'm not sure about the top though. The shape is fine but I wonder if it would better if it was the same walnut as the legs.

Awesome stuff!

Re: Wire Burning Results

#4

Re: Wire Burning Results

bob davis

that is a very nice piece

Re: Wire Burning Results

#5

Superb

Mike Foster

Really nice form. Love the beads. I think the legs work well with the vessel. A really nice first piece of the genre.

Re: Wire Burning Results

#7

Re: Nice job, Where did you sign it?

Dick Wilson

Yes it is. I ended up sign on the darker wood at the bottom. Luckily it is not noticeable.

Re: Wire Burning Results

#8

Betty Scarpino

Re: Wire Burning Results

Betty Scarpino

Dick, lovely curves and the design elements add a nice touch and go together well.