Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

Russ Fairfield's condition

Posts

Russ Fairfield's condition

#1

Ellis Walentine

Russ Fairfield's condition

Ellis Walentine

Hi folks,

I received some disheartening news from Skip Beardsley, who passed along this note from Chad Gladhart via Dave Swanson, who is secretary of Skip's turning club:

Dan and Charlie visited Russ and talked to Gerry (Mrs. Fairfield) recently. Apparently the doctors have given the family a very grim prognosis indicating that Russ has little time left to live. He's on a lot of medication and is reported to be reasonably free of pain. If you would like to visit, do it soon. Russ is still at the Life Care Center in Post Falls. Cards to his home should be address to 3075 Burgandy Trail, Post Falls, Idaho 83854.

I thought you would like to know.

Ellis

Re: Russ Fairfield's condition

#2

Jim in Burlington Ont.

Re: Russ Fairfield's condition

Jim in River Oaks, Ont.

Hi Ellis,

This is very difficult news to absorb, Russ has been such a sharing and guiding person for many of us, it is sad indeed.

Thank you for giving us this news and upsetting as it is.

I am not sure if others know but Russ has always been a presence on a few pen forums, I will forward the news there if it has not already been done.

My prayers are with Russ and his family.

Peace to You All,

Jim

Re: Russ Fairfield's condition

#3

Very sad news indeed.  He taught us a lot

john lucas

Re: Russ Fairfield's condition

#4

George Taylor

Re: Russ Fairfield's condition

George Taylor

I did not know Russ but judging from earlier comments, he is very beloved and admired. My sentiments and prayers are with him and his family.

George

Re: Russ Fairfield's condition

#5

Re: Russ Fairfield's condition

Donna Banfield

Thank you, Ellis.

For me, Russ will always be the father and grandfather of woodturning. When a very green newbie on the rec.craft site, his advice on turning was good, sound, reliable and one I always read and followed.

Re: Russ Fairfield's condition

#6

Re: Russ Fairfield's condition

Bernie Weishapl

That is some very sad news. I never met Russ but did e-mail back and forth with him on some questions. I read his site I don't know how many times when I started trying to learn. He was a good and very helpful man. He will be in our thoughts and prayers.

Re: Russ Fairfield's condition

#7

Re: Russ Fairfield's condition

Mike Rubes, Apex, NC

Ellis,

Thanks for passing this along. I am very sorry to hear this. I thought he was on the mend and doing better.

Good vibes and lots of well wishes for him and his family.

Mike

Thinking of all the stuff others have taught me here in Apex, NC....

Re: Russ Fairfield's condition

#8

That is So Sad.

Barbara Gill

Re: Russ Fairfield's condition

#9

Damn!!!

JamieDonaldson

>>(

Re: Russ Fairfield's condition

#10

Rob Wallace

Re: Russ Fairfield's condition

Rob Wallace

I am really saddened to hear this. Russ has been such a great source of experience and woodturning knowledge, freely disseminated to an unknown but likely very large number of turners who have benefited from his friendly interaction via the Internet on Woodcentral and other boards, as well as through his writings in various publications and on his web site. I hope there is a way to archive and maintain a way to disseminate this information that will continue to help upcoming woodturners long into the future. I am sure he would appreciate knowing that he can continue to help people learn about woodturning, finishing, and other techniques even after his passing. This would be a tribute to him and how he lived his life helping others learn and develop their skills in doing something he also was passionate about.

Prayers and peace to Russ and his family.

Rob Wallace

Re: Russ Fairfield's condition

#11

Re: Russ Fairfield's condition

john lopez

Thanks for keeping us updated Ellis.

If you are new to turning or this website Russ has been a major contributor.

I have used this link many times...

http://www.woodcentral.com/russ/russindex.shtml

Lots of good info there.

Sending good wishes to Russ and his family.

J.L.

Re: Russ Fairfield's condition

#12

Re: Russ Fairfield's condition

charlie belden

We're here for a while, and then we're not - physically here. Some realize that You Can't Take It With You - so they share their knowledge, skills, abilities and their tiime with others. And in doing so, by spreading a little of themselves around to others, they remain in peoples' memories, and in some cases, peoples' hearts. Memories can last much longer than people. Russ shares - and is spread around quite a bit - which covers a lot of ground just in the turning community. By example, he gets others to share as well.

Rather than think in terms of "passing", think instead in terms of passing it on - when you can.

Re: Russ Fairfield's condition

#13

 

Stephen Mushinski

Re: Russ Fairfield's condition

#14

Re: Russ Fairfield's condition

Doug Thompson near Cleveland

It's ashame to read this news... I wish the best to Russ and his family.

Re: Russ Fairfield's condition

#15

Re: Russ Fairfield's condition

Cindy Navarro

I really like Russ and have learned a lot from him. His easy manner and way of teaching made me, as a new turner, unafraid to ask him questions. I have a pen made by him and cherish it and him for giving it to me.

My prayers and thoughts go out to him and his family. I hope that he is comfortable and that his family is comforted by having had him in their lives and all of the memories that will continue to live with those of us whose lives he touched.

Re: Russ Fairfield's condition

#16

Really sad news

Mike Foster

Re: Russ Fairfield's condition

#17

Thank you Ellis

Dave Peebles Lyons, Ohio

I for one have been touched by the greatness of Russ. I will continue to send every positive thought his way.

If he decides to leave this world, we shall not see his kind again. The gift of Russ was his attitude of sharing. No question was too stupid, no question went without an answer, he lived to further all of our skills.

God Bless you Russ, I am happy to call you my friend.

Dave

Re: Russ Fairfield's condition

#18

Re: Russ Fairfield's condition

Ken Ward

That is so sad to here ,as he has been a fantastic contributer to the woodworking world as well as a fine man.I have read and learned from so many of his articals.

Re: Russ Fairfield's condition

#19

JL

Thanks for telling us.

JL

He'll be in my prayers.

Re: Russ Fairfield's condition

#20

Big loss to all of us.....

adrien

Re: Russ Fairfield's condition

#21

Re: Russ Fairfield's condition

Bill Neddow

This is hard news to accept. Russ is very much a part of my life -- every time I finished a bowl. I only met him once and it was a pleasure. He is such a giving person. My prayers go out to him and his family.

Re: Russ Fairfield's condition

#22

Re: Russ Fairfield's condition

Jennifer Indy.USA

Sad news indeed. It's hard to imagine what he and his family are going through right now. Thanks for the update Ellis.

Re: Russ Fairfield's condition

#23

BarbS

Thank you, Ellis.

BarbS

Re: Russ Fairfield's condition

#24

Rats

Mark Mandell - Gone Round In Jersey

Was looking forward to this being a good year, but we're starting off losing one of the really good ones.

Thanks, Ellis. If you contact them, send my best wishes, please.

Re: Russ Fairfield's condition

#25

Re: Russ Fairfield's condition

Seamus Rooney

What a great inspiration to us all!!! Our thoughts and prayers go out to his family!