Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Maxi Cut vs Carbide

Posts

Maxi Cut vs Carbide

#1

Jim Evans

Maxi Cut vs Carbide

Jim Evans

I'm going to buy some larger forstner bits (1-3/4 & 1-1/2") and was wondering if anyone had any thoughts on carbide versus the Colt Maxi cut?

These puppies are a little bit pricey and the Maxi cut requires it's own holders and bit extenders.

The video from Colt looks good, but I'm interested in how long the bit stays sharp compared to a carbide bit.

Re: Maxi Cut vs Carbide

#2

JL

Re: Maxi Cut vs Carbide

JL

Why do you feel you need carbide? They are expensive and expensive to sharpen (though easy to hone).

You can try Toolstoday.com for some less expensive carbide Forstner bits.

http://www.toolstoday.com/p-5370-carbide-tipped-forstner-bits.aspx

Re: Maxi Cut vs Carbide

#3

Jim Evans

Re: Maxi Cut vs Carbide

Jim Evans

I don't want to sharpen the bits. from what I see the Maxi cut is HSS and the Rockler bits are carbide and the price is real close between the 2.

I'm thinking the carbie bits are a better buy based on not needing to sharpen and not needing the Maxi cut extension and holder.

I have some of the carbon/TIN coated cheapo bits and they work somewhat if I sharpen them after each use.

Now I wonder about the difference between full carbide and carbide tipped. The carbide tipped are about 2/3 the cost of full carbide and seem to be just a good.

Re: Maxi Cut vs Carbide

#4

Re: Maxi Cut vs Carbide

Fred Holder

I now have several hundred dollars invested in the Colt Maxi-Cut Forstner Bits. Personally, I feel they are the best buy for drilling that I've ever purchased. They have neat attachments such as a Morse Taper, and several extensions. You do not have to have the Morse Taper or the extensions to use the bits, but they are nice. I would question whether a carbide bit would ever be as sharp as the Colt bits.

Re: Maxi Cut vs Carbide

#5

Re: Maxi Cut vs Carbide

Joe Herrmann

I feel the same way Fred does. I have several of the Maxi Cut bits and plan to buy more of them. The guy who does my saw sharpening told me that they wouldn't be hard to re-sharpen when it comes time either.

Re: Maxi Cut vs Carbide

#6

Jim Evans

Re: Maxi Cut vs Carbide

Jim Evans

I think y'all have convinced me to get the Maxi cut. I appreciate the feedback.

Re: Maxi Cut vs Carbide

#7

Maxi Cut bits are excellent!

Ed Moore in SW VA

You get what you pay for! And though the Maxi Cut bits are not cheap, they are sharper and cut better than any other Forstner style bit that I have found. They are worth the difference in price.

The extensions and Morse taper holders are sheer genius. I had not realized that the gripping part of the shafts of these bits are not round, but rather are a shape repeated three times. Similarly, the Rotastop Morse taper holders and the extensions have a complementary shape repeated three times so that when the bit is inserted and rotated, the bit locks in. No set screws are involved. The shape repeats every 120 degrees, so that a three-jaw chuck will grip the bit accurately and maintain the center.

Highly recommended!

Ed Moore