Replacing Nova 3000 headstock bearings
Starry S Chan
I removed both the Circlips (Item #12 and Item #13) but I could not get the spindle and bearings out.
How do the spindle and these bearings coming out of the headstock? Is it obvious that the tolerance is very tight and the outer bearing race wedged really tight to the headstock barrel. Is there a tool for removing these bearings or I just need to pound them out with brute force? If I need to pound them out, it looks like I should pound the headstock spindle from the front. Am I correct?
If you have done this before, I would appreciate you can share with me your experience.
TIA for yous tips and comments.
Starry



