Today, I took delivery of a custom handwheel, vacuum adaptor and vacuum chuck hub from J T Turning Tools. When I placed my order, I dealt with Tom Steyer, who showed incredible patience answering all my questions and instructing me on the measurements that he needed to make my custom handwheel. The process did not take long and I received the package today. The workmanship on all the aluminum parts is first rate. The handwheel fit perfectly and I was drawing strong vacuum in no time. I've not yet used the vacuum chuck hub that Tom makes, as I need to buy some abs pipe to fit into the hub. I did spin on one of my chucks made from MDF and ABS pipe and the unit worked perfectly.
I can strongly recommend both Tom's excellent service and the handwheels and vacuum adaptors that he sells.
I also bought his hollowing rig, but will wait to offer comments on it until I've put it through its paces. So far, I've only had time to fondle it a bit. I can say that fit and finish are perfect.
I used his custom handwheel, manifold, and all the other fittings for my Nova DVR XP's vacuum setup. I could not have been happier with the components and Tom's answers to my questions. A good guy and quality machining.
I'm looking forward to your review of the Trans-former hollowing tool.
This is good to hear because I just ordered an adapter and the vacuum chuck "kit" yesterday. I finally decided I'm tired of making jam chucks and decided to go vacuum.