Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Find a woodworking club near you

Signature Spot????

Posts

Signature Spot????

#1

Signature Spot????

Dick Wilson

All of my turnings up to this point have had a flat bottom where I could sign my name etc. I am working on a suspended form with the bottom coming down to a point. There will be three round legs. Every surface of the piece will show depending on which way it is sitting. ??????????? Any ideas on where to sign it?

ROFL. This is funny. Thanks for the help.

Re: Signature Spot????

#2

Re: Signature Spot????

steve worcester

Anywhere you like.

The legs, the point on the bottom, if it has wings, maybe under the wings. Think of it as a challenge, where can you sign it or with what color would it be in the shadows.

Re: Signature Spot????

#3

This is definately a head scratcher, thanks

Dick Wilson

Re: Signature Spot????

#4

Re: Signature Spot????

john lucas

It is a head scratcher. I would say it probably has a good side and side that is not so good or has less figure etc. I would sign it small on that side or possibly on the inside lip if there is one. On my Christmas ornaments I sign it on the bottom of the globe next to the finial. Of course it's kind of hidden there and sounds like there isn't any way to hide it on yours.

That's one reason I use the Dremel Engraver to sign my mirrors. Since it simply dents the wood it doesn't scream out like a signature with a black or gold pen. It sort of blends in with the wood. You can read it but it doesn't draw a lot of attention to itself.

Re: Signature Spot????

#5

Katherine Kowalski

Re: Signature Spot????

Katherine Kowalski

I've observed two kinds of makers -- those who wish to "hide" their signature, and those who flaunt it. (My estimates are roughly 99.5% like to "hide" it, either in minuscule lettering or on a side facing down).

I've done both in my art pieces, and found that I really like to sign on the side of a piece, in plain view. Depending on the size, I'll use the Dremel engraver method + gold stick, or pyrography. I'll usually incorporate the signature in the design of the piece, or following the wood grain to achieve an integrated/flowing look.

Being daring and bold can be fun... it may be worth trying if it fits the timbre of the piece!

Katherine

Re: Signature Spot????

#6

Re: Signature Spot????

john lucas

I've often wondered why we hide our signature. Photographers seem to writed on the border not the image. Painters on the other hand smear it right on the front for everyone to see. I think turners started putting it on the bottom because that's the way the ceramicists do.

Now that we are getting into styles and forms that don't have a hidden area or bottom then you run into the problem mentioned above.

Re: Signature Spot????

#7

Re: Signature Spot????

Don at Central Illinois

John, I hadn't thought of that, but on all my photos that leave my studo, my studio name is in one of the two lower corners, because I'm proud of the photo and want everyone to know who took it. Maybe I'll have to rethink by signing on my turned pieces.

Re: Signature Spot????

#8

John

Dick Wilson

You make a excellent point. All I have ever heard is hide you signature on the bottom.....why. Like you said, paint artists sign the painting, not the back of the canvas, but in the painting. Thanks

Re: Signature Spot????

#9

Dick Hines

Re: John

Dick Hines

My hand writeing is so bad that not one knows who turned the piece anyway.

Re: Signature Spot????

#10

Re: This is definately a head scratcher, thanks

Bill Youngblood

Recently, one of the members of our club did a colaborative with his wife. He turned a vase and she did the pyrography. He signed the bottom and she signed, very small,the lower front under the image. Looked good to me.

Re: Signature Spot????

#11

You want some fun?  Try signing ...

Ed Moore in SW VA

the rim of a sputnik sea urchin ornament which is near the icicle. The irregular surface makes it virtually impossible to print legibly.

The icicle does not touch the shell on the bottom, it is secured at the small hole on the top.

Ed

Re: Signature Spot????

#12

Re: You want some fun?  Try signing ...

Bill Noce Northeast Ohio

Very nice Ed....question for you> What is the process for attaching the bottom that way?

Re: Signature Spot????

#13

Sputnik ornament assembly

Ed Moore in SW VA

Hi Bill, The easiest way to explain it is with a picture



The ornament sits on a flange that is bigger than the small hole and smaller than the large hole. I try to arrange it so the icicle flairs out above the long teardrop is centered on the large hole, as seen in the previous picture with the ornament assembled. The icicle is reverse turned by using a collet on the approximately 1/4" straight shaft above the flair.

This is a process that I teach in the Ornaments course at John C Campbell Folk School. I expect to teach that course in May, 2011, because my treatment for bladder cancer is going very well. Hair is starting to grow back after the chemotherapy and I look like a Chia Pet. Five more weeks of radiation to go. The prayer support has been incredible, highly effective, and it is deeply appreciated.

Ed

Re: Signature Spot????

#14

Time for you to get a real .....

JamieDonaldson

...cadet buzz cut soldier, so just keep marching!! :D

Re: Signature Spot????

#15

Oo-Rah!

Ed Moore in SW VA

Not til it's warmer!

I was an employee of the U.S. Navy, but I was never in the military. Because I gave a lot of help to a Marine Mathematics Instructor at the Naval Academy I was "adopted", and therefore feel compelled to say "SEMPER FI".

Ed

Re: Signature Spot????

#16

Re: Sputnik ornament assembly

Bill Noce Northeast Ohio

Thanks Ed,

I was thinking it was a dole system that held them together.