Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This $39 jig will make you a WOODWORKING GOD!

Jet Mini Belt *LINK*

Posts

Jet Mini Belt *LINK*

#1

Jet Mini Belt *LINK*

Tony - Memphis

I found a source for belts, but I'm not sure exactly what I'm ordering. They list a 240J3, but without much else for description. The price is less than $4 vs. the $20 for a Jet belt at ereplacement and Jet. Figured it was worth a shot. Any good sources?

Here is where I was looking...

http://store.ametric.com/p-30292-1-043-240j3.aspx

My belt is looking a bit rough. The edges are getting frayed. Not sure why.

Tony


Belt Supplier

Re: Jet Mini Belt *LINK*

#2

Jim Evans

Re: Jet Mini Belt

Jim Evans

Tony,

How can you tell the belt diameter or size?

Re: Jet Mini Belt *LINK*

#3

Rob Wallace

Source for J-Section Poly-V belts..... *LINK*

Rob Wallace

Tony:

The belt you specify is a 24 inch Polv-V belt, with a J-section, having 3 ribs. It is a common belt used on many mini-/midi-lathes.

I have ordered a number of these kinds of belts (as a group purchase for our turners club to have replacement/spare belts on hand should the lathe belt break - much easier to have one on hand and replace it immediately than to wait until one arrives!) from a company in Lafayette, Louisiana named "Belts for Anything", and could not have been happier with the customer service, discount prices (particularly for our group order), and reasonable shipping charges that I can recommend them without reservation - they are an excellent source for all kinds of belts. Their web site is listed below.

Rob Wallace


Belts For Anything

Re: Jet Mini Belt *LINK*

#4

Re: Jet Mini Belt

Tony - Memphis

According to what I have read, the 240 number refers to the size, which is 24" in length. I think there was a post here on that and I also saw some info at the web site I posted. Seems like they had a PDF on the designation. I've read so much, I can't recall where I saw what!

Tony

Re: Jet Mini Belt *LINK*

#5

Re: Source for J-Section Poly-V belts.....

Tony - Memphis

Thanks. I looked at their site, but I saw that you had to call, so I kept looking. I'll call them! I don't turn much, but the belt is getting old and as I said it is getting a little ragged on the edges. Sometimes, it makes a little ticking sound. for the money, this has beena great investment. I mostly turn furniture parts and whatnots. I bought the extension too. Great little lathe that is plenty for my needs. Now, if I could just figure out how to use it well! i recently figured out I could make nice little quciky gift items with it. People really seem to appreciate something hand made even if it is a simple pen or pill holder or whatever.

Tony

Re: Jet Mini Belt *LINK*

#6

Re: Source for J-Section Poly-V belts.....

Bill Turpin in WNC mountains

fraying of a poly-groove belt is usually do to miss-alignment.Take a ruler, straight edge, etc and line up the pulleys at a point where the thickness between the side of pulley and the first groove is the same.