Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

2 centers, wings & natural edge...

Posts

2 centers, wings & natural edge...

#1

Leo Cuellar

2 centers, wings & natural edge...

Leo Cuellar

still playing with scraps of that curly, spalted birch. The pieces are just too pretty to throw away! First turned between centers to get the arced end. Second spin mounted on a glue block to turn the top and bowl, then reverse chucked to get the bottom. I was left with a chunk on the natural edge that couldn't be reached by normal means, and it was too fragile & awkward to be clamped down. I left it chucked & held my freshly sharpened bowl gouge on the tool rest and twisted the piece into it by hand until I had removed what I needed. That worked way too easy, so I must have been doing something wrong :D



Paperclip for scale.



Found some great little mandrels at the local hardware store so I made my first attempt at mini-mops to do it up right. Howard's orange oil & wax for a finish.

Critique is always welcome!

Leo

Re: 2 centers, wings & natural edge...

#2

Re: 2 centers, wings & natural edge...

matt overton

Well done. You did the wood justice.

Re: 2 centers, wings & natural edge...

#3

Leo Cuellar

Re: 2 centers, wings & natural edge...

Leo Cuellar

Thank you, Matt. I appreciate the encouragement. This one may have been small, but it used most of the tips I've gleaned from hanging out here. :)

Leo

Re: 2 centers, wings & natural edge...

#4

Re: 2 centers, wings & natural edge...

Jason Nemec

Nice work! There are so many interesting shapes you can create by designing with the lathe by spinning a piece from different centers.

Re: 2 centers, wings & natural edge...

#5

Leo Cuellar

Re: 2 centers, wings & natural edge...

Leo Cuellar

Yeah, its a lot of fun coming up with a concept and then figuring out how to execute it. You certainly raised the bar with your last piece. :)